Development of software for hydraulic profile calculations and layout drawing of activated sludge treatment plants

Download
009688.pdf
1990
Mukhallalati, Labeeb
Show full item record
84
views
0
downloads
https://hdl.handle.net/11511/10002
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Development of computational software for analysis of curved girders under construction loads
Topkaya, Cem (Elsevier BV, 2003-09-01)
The analysis of horizontally curved, trapezoidal steel girders presents a variety of computational challenges. During the erection and construction stages before a concrete deck is available to form a closed section, these girders are weak in torsion and susceptible to warping. Considering the design of an entire bridge system, current design approaches favor the use of a grid analysis methodology. While the use of a grid analysis procedure offers the advantage of computational efficiency, it is unable to c...
Development of a passive vibration isolation analysis and optimization software for mechanical systems
Baytemir, Ozan Yavuz; Ciğeroğlu, Ender; Özgen, Gökhan Osman; Department of Mechanical Engineering (2014)
In the design stage of a mechanical structure, the effects of vibration are taken into consideration as important design criteria. In order to eliminate the adverse effects of vibration sources, a direct intervention to the vibration source, structural reinforcement or the use of vibration isolators are encountered as the most popular vibration control methods. Among all, being compact, low cost, reliable and maintenance free, elastomeric passive vibration isolators with linear properties are examined withi...
Development of software for calculations of the reflectance, transmittance and absorptance of multilayered thin films
Şimşek, Yusuf; Esendemir, Akif; Department of Physics (2008)
The aim of this study is to develop a software which calculates reflection, transmission and absorption of multilayered thin films by using complex indices of refraction, as a function of both wavelength and thickness. For these calculations matrix methods will be considered and this software is programmed with the matrix method. Outputs of the program will be compared with the theoretical and experimental results studied in the scientific papers.
Development of tools for modeling hybrid systems with memory
Gökgöz, Nurgul; Öktem, Hakan; Department of Scientific Computing (2008)
Regulatory processes and history dependent behavior appear in many dynamical systems in nature and technology. For modeling regulatory processes, hybrid systems offer several advances. From this point of view, to observe the capability of hybrid systems in a history dependent system is a strong motivation. In this thesis, we developed functional hybrid systems which exhibit memory dependent behavior such that the dynamics of the system is determined by both the location of the state vector and the memory. T...
Development of a GIS software for evaluating network relibility of lifelines under seismic hazard
Oduncuoğlu, Lütfi; Düzgün, H. Şebnem; Kestel, Sevtap Ayşe; Department of Geodetic and Geographical Information Technologies (2010)
Lifelines are vital networks and it is important that those networks are still be functional after major natural disasters such as earthquakes. The goal of this study is to develop a GIS software for evaluating network reliability of lifelines under seismic hazard. In this study, GIS, statistics and facility management is used together and a GIS software module, which constructs GIS based reliability maps of lifeline networks, is developed by using geoTools. Developed GIS module imports seismic hazard and l...
Citation Formats
L. Mukhallalati, “Development of software for hydraulic profile calculations and layout drawing of activated sludge treatment plants,” Middle East Technical University, 1990.
METU IIS - Integrated Information Service open@metu.edu.tr