A three dimensional linear contact algorithm and simulation of metal forming processes

Download
047326.pdf
1995
Şavkılıoğlu, Murat
Show full item record
86
views
0
downloads
https://hdl.handle.net/11511/10027
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

A computational study of subsonic flowfields over a missile configuration
Uygun, Murat; Tuncer, İsmail Hakkı (1997-01-06)
A computational study of flow separation characteristics and wake profiles behind a flapping airfoil
Tuncer, İsmail Hakkı (1999-01-01)
© 1999 American Institute of Aeronautics and Astronautics, Inc. All rights reserved.Unsteady, viscous flowfields over a NACA0012 airfoil oscillated in plunge and/or pitch at various reduced frequency, amplitude and phase shift are computed. Vortical wake formations, boundary layer flows at the leading edge, the formation of leading edge vortices and their downstream convection are presented in terms of unsteady particle traces. Flow separation characteristics and thrust producing wake profiles are identifie...
A numerical simulation study on mixing of inert cushion gas with working gas in an underground gas storage reservoir
Kilincer, N; Gumrah, F (2000-12-01)
The cushion gas, providing the pressure energy necessary for withdrawal of working gas, makes up the largest part of the investment in underground gas storage projects. The suggested method of reducing this cost is the replacement of some part of the cushion gas with less expensive inert gas, such as nitrogen. In the replacement, there might be some problems due to mixing between natural gas and inert gas. Turkey has sharply increasing demand for natural gas. The constant imported gas and varying demand thr...
A computational analysis of operations in waxy crude oil pipelines
Güney, Aylin; Eralp, O. Cahit; Department of Mechanical Engineering (1999)
A computer simulation of void dynamics under the action of electromigration and capillary forces in narrow thin interconnects
Ogurtani, TO; Oren, EE (2000-10-25)
In these studies a comprehensive picture of void dynamics in connection with the critical morphological evaluation has been thoroughly anticipated in order to understand main reasons as well as the conditions under which premature failure of metallic thin interconnects occur. Our mathematical model on diffusion and mass accumulation on void surfaces, under the action of applied electrostatic potential and capillary effects, follows a novel irreversible but discrete thermodynamic formulation of interphases a...
Citation Formats
M. Şavkılıoğlu, “A three dimensional linear contact algorithm and simulation of metal forming processes,” Middle East Technical University, 1995.
METU IIS - Integrated Information Service open@metu.edu.tr