Farkli etkilesim yöntemlerinin is süreci modelleme evrelerine olan etkisinin incelenmesi

Date

2016-01-01

Author

Coskunçay, Duygu Findik
Çakır, Murat Perit

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

33
views

0
downloads

URI

https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84996567252&origin=inward
https://hdl.handle.net/11511/100572

Conference Name

10th Turkish National Software Engineering Symposium, UYMS 2016

Collections

Graduate School of Informatics, Conference / Seminar

Suggestions

OpenMETU
Core

Drag measurement of different car bodies via balance technique and momentum integral method Çaylan, Gülsüm; Albayrak, Kahraman; Department of Mechanical Engineering (2014) In this thesis study, Ahmed Body and MIRA Notchback model were investigated experimentally. The drag coefficients of reference models were measured at three different Reynolds number via balance technique. The wakes of reference models were also investigated and the suitable location in order to measure the drag coefficient was determined via momentum integral method. Surface pressure of two different types of vehicle models was measured at three different Reynolds number. The wakes of Ahmed Body which has ...
Performance based design of r/c tall buildings in two different seismic zones Çiftçioğlu, Mustafa Güneş; Binici, Barış; Department of Civil Engineering (2023-1-20) Performance-based design of R/C tall structures has become mandatory with Turkish Earthquake Code (2018). While some professionals think that linear capacity design is sufficient, others have supported this new approach only in regions where earthquake is more effective. Nonlinear design requires comprehensive and detailed theoretical knowledge. The compatibility of Perform 3D software, widely used in this design, with experiment results is unknown and calibration is not mandatory in the regulation. It is ...
Effects of different bed roughnesses on the characteristics of hydraulic jumps Velioğlu, Deniz; Tokyay, Nuray; Department of Civil Engineering (2012) In practice, baffle blocks and sills are commonly being used to stabilize the location of a hydraulic jump and shorten the length of a stilling basin. On the other hand, gravels, corrugations and rectangular prismatic roughnesses which cover the entire length of the basin or placed in a staggered manner may be an alternative. The objective of this study is to determine the effects of these roughness elements on the characteristics of hydraulic jumps such as conjugate depth, jump length and energy dissipatio...
Analysis of the physical properties of different types of neutron stars Taşkın, Mustafa Özgür; Kızıloğlu, Nilgün; Department of Physics (2005) This thesis is composed of three published articles. Each chapter is devoted to an article. In the first part the origin of some of the single radio pulsars with relatively low magnetic fields (B < 1e12 G) and with characteristic ages (tau) less than 1e7 years is questioned. We proposed that such pulsars might occur as a result of the disruption of high-mass X-ray binary systems after a second supernova explosion. In these binaries, mass accretion on to the surface of X-ray pulsars may lead to the decrease ...
Evaluating the impact of different atria configurations on the energy performance of buildings in different climates Farhoudi, Meysam; Elias Özkan, Soofia Tahira; Department of Building Science in Architecture (2016) Generally, the impact of the building sector on the world energy consumption and environmental protection is considerable; in fact, the building sector holds the half of the world total energy consumption share. Nowadays, energy efficiency phenomena as the result of several challenges that the world is encountering has become an important issue. Meanwhile, the atrium as a tool to improve the energy performance of a building can be utilized to address the high energy consumption of the conventional buildings...

Citation Formats

D. F. Coskunçay and M. P. Çakır, “Farkli etkilesim yöntemlerinin is süreci modelleme evrelerine olan etkisinin incelenmesi,” Çanakkale, Türkiye, 2016, vol. 1721, Accessed: 00, 2022. [Online]. Available: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84996567252&origin=inward.