Failure of HTPB based composite solid propellants

Download

056498.pdf

Date

1996

Author

Koç, S. Ender

Metadata

Show full item record

Item Usage Stats

102
views

0
downloads

URI

https://hdl.handle.net/11511/10067

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Failure of orthogonally jointed rock masses under surface loads Acaralp, Orhan Zafer; Tutluoğlu, Levent; Department of Mining Engineering (1993)
Failure Initiation and Progression in 0 90 CFRP Composite Beams Subject to Out of Plane Low velocity Impact Çöker, Demirkan; Gürses, Ercan (null; 2015-10-26)
Failure analysis of advanced composites under impact by cohesive zone method Doğan, Oğuz; Parnas, Kemal Levend; Department of Mechanical Engineering (2013) The main objective of this study is to investigate the delamination damage of laminated composites subjected to low velocity impact. Three-dimensional finite element analyses are conducted to determine delamination area, shape and location. The impact analysis is performed by using the explicit finite element method which uses the central difference rule to integrate the equations of motion through the time. The composite structures are modeled using eight-node solid elements. The critical interfaces betwee...
Failure analysis of shear critical RC structural members Sarıtaş, Afşin (2004-06-01) This paper presents a beam finite element for the simulation of the monotonic and cyclic response of RC structural members under the interaction of flexure, axial force and shear. The proposed beam element follows the assumptions of the Timoshenko shear beam theory with a three-field Hu-Washizu variational formulation for the derivation of the element response. The nonlinear response of the element is obtained through section integration of nonlinear material response. A 3d plastic damage model for cyclic a...
Failure behavior of on-site repaired CFRP laminates Sonat, Evren; Bakır, Mete; Özerinç, Sezer (2023-05-01) On-site repairs of carbon fiber reinforced polymer (CFRP) composites involve out-of-autoclave curing, which increases the defect density and reduces the mechanical properties. This work aims to understand the strength and the associated failure mechanisms of on-site repaired woven CFRP laminates through experiments and simulations. A series of wet lay-up and prepreg step repaired specimens produced according to standardized aerospace procedures were tested under uniaxial tension. Wet lay-up repair provided ...

Citation Formats

S. E. Koç, “Failure of HTPB based composite solid propellants,” Middle East Technical University, 1996.