Analysis of filament wound cylinders against torsion

Download
056805.pdf
1996
Kuş, Volkan
Show full item record
72
views
0
downloads
https://hdl.handle.net/11511/10071
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Analysis of filament wound tubes against torsion
Parnas, L; Akkas, N (1997-06-06)
The response of filament-wound composite tubes under pure torsional loading has been investigated. The tubes, produced using the wet winding technique, are made of E-Glass, S2-Glass, Aramid and Carbon/Epoxy with three lamination sequences and three different helix-winding angles. Experiments have been performed by applying twisting moment at the free end which is also free to extend or contract in axial direction while keeping the other end fixed by special end fixtures. Specimens have the same internal dia...
Analysis of axisymmetric cup drawing in relation to friction
Darendeliler, Haluk (1996-03-15)
The application of computer-aided simulation to manufacturing by using sheet-metal forming processes in industry, leads to the elimination of the repetitive production of expensive dies, and the loss of time, labor and material. The finite-element method has been widely used in the anlaysis of sheet-metal forming processes, in this way making it possible to determine the deformed shape and the variation in the thickness of the material. Hence, the drawability and the shape of the blank can be determined in ...
Analysis of laminar natural convective heat transfer in a triangular enclosure
Al-Shariah, Adnan M; Ecevit, Ahmet; Department of Physics (1990)
Analysis of stress in a solid cylinder with periodic heat generation
Varlı, Ekin; Eraslan, Ahmet Nedim; Department of Engineering Sciences (2015)
Thermoelastic stress response of a periodic heat generating solid cylinder is investigated by analytical means. The cylinder is initially at zero temperature. For times greater than zero, heat is generated internally and slowly at a time dependent rate. Two periodic heat generation rates are used. The temperature distribution in the solid cylinder corresponding to each generation rate is obtained by making use of Duhamel’s theorem. An uncoupled thermoelastic solution of the solid cylinder is then obtained u...
Analysis of frictional contacts with heat generation considering temperature dependent properties
BALCI, MEHMET NURULLAH; YILDIRIM, BORA; Dağ, Serkan (2015-10-01)
The problem of thermoelastic contact for the homogenous isotropic half-plane with a sliding rigid flat punch problem is investigated. As the rigid flat punch is assumed to slide over the surface of the material, heat is generated due to the friction between the punch and a surface. This heat causes the change of material thermoelastic properties and this change is taken into account in this work by using temperature dependent material properties. In order to obtain the steady state solution, frictional heat...
Citation Formats
V. Kuş, “Analysis of filament wound cylinders against torsion,” Middle East Technical University, 1996.
METU IIS - Integrated Information Service open@metu.edu.tr