Effects of Specimen Preparation Parameters on the Tensile Strength of Unidirectional Towpreg Composites

Date

2021-11-20

Author

Ökten, Yiğit Kemal
Özaslan, Emre
Kaynak, Cevdet

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

169
views

0
downloads

URI

https://hdl.handle.net/11511/100726

Conference Name

6th International Conference on Frontiers of Composite Materials - ICFCM 2021

Collections

Department of Metallurgical and Materials Engineering, Conference / Seminar

Suggestions

OpenMETU
Core

Effects of production parameters on the structure of resol type phenolic resin/layered silicate nanocomposites Kaynak, Cevdet (Elsevier BV, 2006-08-01) Polymer/layered silicate nanocomposites belong to one of the most promising group of materials of the past few decades and most probably for the near future. Following the pioneering works of Toyota Research Group in the 1980s, the interest on these materials increased rapidly and research is now being carried out world wide, using all kinds of polymers as base material.
Effects of mixture design parameters and compaction methods on the properties of roller compacted concrete pavements Şengün, Emin; Yaman, İsmail Özgür; Department of Civil Engineering (2019) The aim of the thesis is to develop laboratory compaction methodology suitable for simulating field compaction procedures used for creating roller compacted concrete (RCC) mixtures. Based on this methodology, mechanical performance and fracture properties of RCC mixtures of different strength classes were determined and long-term fatigue performance of RCC mixtures with different strength levels was investigated. In this context, a three-phase experimental study was designed. First, mixtures with different ...
Effects of injection molding conditions on the mechanical properties of polyamide/glass fiber composites Cansever, Cahit Can; Yılmazer, Ülkü; Department of Polymer Science and Technology (2007) In this study, effect of injection molding process parameters on fiber length and on mechanical properties of Polyamide-6 / glass fiber composite were investigated to produce higher performance composites. Polyamide-6 was first compounded with an E-grade glass fiber in a co-rotating intermeshing twin screw extruder. Then, by using this composite, twenty-five types of experiments were performed by injection molding by changing the barrel temperature, injection pressure, hold pressure, mold temperature, cooli...
Effects of fabrication parameters on the performance of solid oxide electrolyzer cell Korkmaz, Hatice; Timurkutluk, Bora; Timurkutluk, Cigdem (2016-06-22) The microstructure has a great impact on the performance of solid oxide fuel/electrolyzer cells while the cell fabrication parameters mainly determine the microstructure of the cell components. In this study, a number of five-layered cells with 16 cm(2) active area are fabricated and the effects of several cell fabrication parameters including sintering temperature and electrode composition on the hydrogen production performance are investigated. The experimental results showed that the optimum sintering te...
Effects of operational parameters on the settling properties of activated sludge Sürücü, Gülerman; Soyupak, Salçuk (Informa UK Limited, 1989-5) Settling properties of activated sludge typically establish the performance and the cost of biological wastewater treatment plants, and they are considerably affected by the solids concentration of the sludge and the mean cell residence time of the system. In this work, effects of mean cell residence time of the system and solids concentration of sludge on the settling properties of activated sludge were studied. By statistical analysis of the laboratory data, mathematical expressions were suggested to e...

Citation Formats

Y. K. Ökten, E. Özaslan, and C. Kaynak, “Effects of Specimen Preparation Parameters on the Tensile Strength of Unidirectional Towpreg Composites,” presented at the 6th International Conference on Frontiers of Composite Materials - ICFCM 2021, Melbourne, Avustralya, 2021, Accessed: 00, 2022. [Online]. Available: https://hdl.handle.net/11511/100726.