Analysis and control of impact modifiers for plastics toughening.

Download
029397.pdf
1993
Taef, Gissou
Show full item record
60
views
0
downloads
https://hdl.handle.net/11511/10111
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Analysis and performance of warp regulators during weaving.
Bozdağ, Murat; Department of Mechanical Engineering (1985)
Analysis and design of helicopter rotor blades for reduced vibrational level
Tamer, Aykut; Yaman, Yavuz; Department of Aerospace Engineering (2011)
In this thesis analysis and design of helicopter rotor blades were discussed for reduced vibrational level. For this purpose an optimization procedure was developed which involves coupling of the comprehensive rotorcraft analysis tool CAMRAD JA and the gradient based optimization algorithm. The main goal was to achieve favorable blade structural dynamics characteristics that would lead to reduction in vibrational level. For this purpose blade stiffness and mass distributions were considered as the design va...
Analysis and Design of Multichannel Systems for Perceptual Sound Field Reconstruction
De Sena, Enzo; Hacıhabiboğlu, Hüseyin; Cvetkovic, Zoran (2013-08-01)
This paper presents a systematic framework for the analysis and design of circular multichannel surround sound systems. Objective analysis based on the concept of active intensity fields shows that for stable rendition of monochromatic plane waves it is beneficial to render each such wave by no more than two channels. Based on that finding, we propose a methodology for the design of circular microphone arrays, in the same configuration as the corresponding loudspeaker system, which aims to capture inter-cha...
Analysis and prediction of filter cake washing
Güçbilmez, Yeşim; Yılmaz, Levent; Department of Chemical Engineering (1999)
Analysis and design of cylindrically conformal microstrip antennas
Taşoğlu, Ali Özgür; Dural Ünver, Mevlüde Gülbin; Department of Electrical and Electronics Engineering (2011)
Cylindrically conformal microstrip antennas are investigated. Two different structures, namely proximity coupled and E-shaped microstrip antennas are analyzed and information about the design parameters is obtained by means of parametric study. With these structures, cylindrical arrays, having omnidirectional radiation in the circumferential plane of the cylinder, are designed. Proximity coupled cylindrical arrays operate in the 2.3-2.4 GHz aeronautical telemetry band with approximately 4% bandwidth. On the...
Citation Formats
G. Taef, “Analysis and control of impact modifiers for plastics toughening.,” Middle East Technical University, 1993.
METU IIS - Integrated Information Service open@metu.edu.tr