Frictional resistance of driven piles in cohesive soils

Download
023302.pdf
1992
Akdogan, Mutlu
Show full item record
52
views
0
downloads
https://hdl.handle.net/11511/10133
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Frictional Hertzian contact between a laterally graded elastic medium and a rigid circular stamp
Dağ, Serkan; YILDIRIM, BORA; Ozatag, A. Cihan (Springer Science and Business Media LLC, 2013-08-01)
This study investigates the problem of sliding frictional contact between a laterally graded elastic medium and a rigid circular stamp. Analytical and computational methods are developed to evaluate the contact stresses. In the analytical formulation, spatial variation in the shear modulus of the graded medium is represented by an exponential function, and Poisson's ratio is taken as a constant. Coulomb's dry friction law is assumed to hold within the contact area. The two-dimensional plane elasticity probl...
Frictionless double contact problem for an axisymmetric elastic layer between an elastic stamp and a flat support with a circular hole
Mert, Oya; Geçit, M. Ruşen; Department of Engineering Sciences (2011)
This study considers the elastostatic contact problem of a semi-infinite cylinder. The cylinder is compressed against a layer lying on a rigid foundation. There is a sharp-edged circular hole in the middle of the foundation. It is assumed that all the contacting surfaces are frictionless and only compressive normal tractions can be transmitted through the interfaces. The contact along interfaces of the elastic layer and the rigid foundation forms a circular area of which outer diameter is unknown. The probl...
Friction factors for hydraulic calculations considering presence of cuttings and pipe rotation in horizontal/highly-inclined wellbores
Sorgun, Mehmet; Aydın, İsmail; Ozbayoglu, M. Evren (2011-08-01)
Pressure loss calculations have a vital role for determining hydraulic horsepower requirements and to predict bottomhole treating pressure. One of the major concerns in developing hydraulic programs is to estimate the frictional pressure losses while cuttings are present in the annulus during pipe rotation. An experimental work has been carried out in a cuttings transport flow loop capable of operating at various inclinations. The pressure drop in the test section was recorded for variable flow rates, cutti...
Friction identification and compensation of its effects in stabilized platforms
Sincar, Eyyüp; Balkan, Raif Tuna; Platin, Bülent Emre; Department of Mechanical Engineering (2013)
A frequent problem encountered in the stabilization of a dynamic system supported by a moving base is the disturbance rejection associated with moving components. Due to relative motion of adjacent components, the friction induces a destabilizing force from base motion to the stabilized object, which degrades the motion accuracy. Therefore, the compensation of frictional effects is necessary in order to obtain a highly precise stabilization performance, especially, when the stabilized system undergoes low-v...
FRICTION AND WEAR BEHAVIOR OF SELECTED DENTAL CERAMICS
PARK, JONGEE; PEKKAN, Gürel; Öztürk, Abdullah (World Scientific Pub Co Pte Lt, 2009-10-01)
The purpose of this study was to determine the friction coefficients and wear rates of six commercially available dental ceramics including IPS Empress 2 (E2), Cergo Pressable Ceramic (CPC), Cercon Ceram (CCS) and Super porcelain EX-3 (SPE). Bovine enamel (BE) was also tested as a reference material for comparison purposes. Samples of the dental ceramics were prepared according to the instructions described by the manufacturers in disk-shape with nominal dimensions of 12 mm x 2 mm. The wear tests were perfo...
Citation Formats
M. Akdogan, “Frictional resistance of driven piles in cohesive soils,” Middle East Technical University, 1992.
METU IIS - Integrated Information Service open@metu.edu.tr