Semi-empical analysis of flume bed load data.

Download
029919.pdf
1993
İhtiyaroğlu, Gül
Show full item record
57
views
0
downloads
https://hdl.handle.net/11511/10179
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Semi-empirical modeling and optimization of metal sputtering processes
Çimen, Özge; Kıncal, Serkan; Department of Chemical Engineering (2015)
Continuous miniaturization of thin film based electronic devices is the major motivator for research in physical vapor deposition (PVD) applications especially in military and aerospace applications. The challenges in the good quality thin film is the requirement for good mechanical, optical and electrical properties and high thickness uniformity across wafer. In this study, the magnetron sputtering system was investigated which is a commonly used technique to deposit thin films. Deposition and heat transfe...
Semi-Bayesian Inference of Time Series Chain Graphical Models in Biological Networks
Farnoudkia, Hajar; Purutçuoğlu Gazi, Vilda (null; 2018-09-20)
The construction of biological networks via time-course datasets can be performed both deterministic models such as ordinary differential equations and stochastic models such as diffusion approximation. Between these two branches, the former has wider application since more data can be available. In this study, we particularly deal with the probabilistic approaches for the steady-state or deterministic description of the biological systems when the systems are observed though time. Hence, we consider time s...
Semi-parametric Estimation of Count Time Series
Ghahramani, Melody; Dag, Osman; de Leon, Alexander R. (2014-06-27)
A flexible semi-parametric model for autocorrelated count data is proposed. Unlike earlier models available in the literature, the model does not require construction of a likelihood function and only entails the specification of the first two conditional moments. An estimating function approach is adopted for the model. The efficiency of the estimates is investigated numerically against competing estimates via simulation studies.
Semi analytical study of stress and deformation analysis of anisotropic shells of revolution including first order transverse shear deformation
Oygür, Özgür Sinan; Kayran, Altan; Department of Aerospace Engineering (2008)
In this study, anisotropic shells of revolution subject to symmetric and unsymmetrical static loads are analysed. In derivation of governing equations to be used in the solution, first order transverse shear effects are included in the formulation. The governing equations can be listed as kinematic equations, constitutive equations, and equations of motion. The equations of motion are derived from Hamilton’s principle, the constitutive equations are developed under the assumptions of the classical laminatio...
Semi-distributed hydrologic modeling studies in Yuvacik basin
Yener, Mustafa Kemal; Şorman, Ali Ünal; Department of Civil Engineering (2006)
In this study, Yuvacık Basin, which is located in southeastern part of Marmara Region of Türkiye, is selected as the application basin and hydrologic modeling studies are performed for the basin. Basin is divided into three subbasins such as: Kirazdere, Kazandere, and Serindere and each subbasin is modeled with its own parameters. In subbasin and stream network delineation HEC-GeoHMS software is used and for the hydrologic modeling studies the new version of HEC-HMS hydrologic modeling software released in ...
Citation Formats
G. İhtiyaroğlu, “Semi-empical analysis of flume bed load data.,” Middle East Technical University, 1993.
METU IIS - Integrated Information Service open@metu.edu.tr