A Paleolimnological Approach to Understand Regime-Shift Dynamics in Ladik Lake (North Turkey)

Date

2023-01-01

Author

Maraşlioğlu, Faruk
Soylu, Elif Neyran
Avşar, Ulaş
Hubert-Ferrari, Aurelia

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

154
views

0
downloads

URI

https://hdl.handle.net/11511/102378

Journal

APPLIED ECOLOGY AND ENVIRONMENTAL RESEARCH

DOI

https://doi.org/10.15666/aeer/2101_637650

Collections

Department of Geological Engineering, Article

Suggestions

OpenMETU
Core

A Material Perspective on Consequences of Deformation Heating During Stamping of DP Steels Şimşir, Caner; Efe, Mert; Çetin, Barış (null; 2017-07-01)
A biochemical approach for the estimation of food provision for heterotrophic organisms of the black sea Shulman, Ge; Yuneva, Tv; Yunev, Ao; Svetlıchny, Ls; Annınsky, Be; Ramonova, Za; Arashkevıch, Eg; Kıdeyş, Ahmet Erkan; Bingel, Ferit; Uysal, Zahit; Yılmaz, A. (Kluwer Academic Publishers, 1998-01-01)
A Proteomic approach to the comparison of two pine species: proteomes of pinus brutia and pinus sylvestris under environmental stress Yılmaz, Can; İşcan, Mesude; Güray, Tülin; Department of Biochemistry (2013) Drought and cold are environmental factors that affect the development and dispersion of plant species. In this study, two pine species adapted to different environmental conditions: Pinus brutia Ten. (Turkish red pine) and Pinus sylvestris L. (Scots pine) were subjected to a proteome research under those stresses. 20 trees from each species, located in the same region and elevation at Yalıncak area in METU Campus, were marked and sampled for their needles, three times in a year: at the end of dry and hot s...
A Material Perspective on Consequence of Deformation Heating During Stamping of DP Steels ŞİMŞİR, CANER; Cetin, B.; Efe, Mert; Davut, K.; Bayramin, B. (2017-07-06) Recent studies showed that, during stamping of high strength steels at industrially relevant production rates, local temperature in the blank may rise up to 200°C – 300°C due to deformation heating. Moreover, die temperature may also rise up to 100°C – 150°C for progressive stamping dies. Based on the common assumption that the blank softens as the temperature increases, thermal softening creates a margin in Forming Limit Diagram (FLD) and therefore the FLD determined at room temperature can safely be used ...
A reaction-transport-mechanical approach to modeling the interrelationships among gas generation, overpressuring, and fracturing: Implications for the Upper Cretaceous natural gas reservoirs of the Piceance basin, Colorado Payne, DF; Tuncay, Kağan; Park, A; Comer, JB; Ortoleva, P (2000-04-01) Predicting reservoir characteristics in tight-gas sandstone reservoirs, such as those of the Upper Cretaceous units of the Piceance basin, is difficult due to the interactions of multiple processes acting on sediments during basin development. To better understand the dynamics of these systems, a forward numerical model, which accounts for compaction, fracturing, hydrocarbon generation, and multiphase flow (BasinRTM) is used in a one-dimensional simulation of the U.S. Department of Energy's Multiwell Experi...

Citation Formats

F. Maraşlioğlu, E. N. Soylu, U. Avşar, and A. Hubert-Ferrari, “A Paleolimnological Approach to Understand Regime-Shift Dynamics in Ladik Lake (North Turkey),” APPLIED ECOLOGY AND ENVIRONMENTAL RESEARCH, vol. 21, no. 1, pp. 637–650, 2023, Accessed: 00, 2023. [Online]. Available: https://hdl.handle.net/11511/102378.