The design and operation od a manually operated spot welding machine.

1966
Yaylali, Cinar
Show full item record
73
views
0
downloads
https://hdl.handle.net/11511/10263
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

The design and construction of the video amplifiers combined with emphasis units for the CENTO microwave system.
Turan, Ilter; Department of Electrical Engineering (1972)
The design and construction of 300 baud modem set.
Yüngül, Dinçer; Department of Electrical Engineering (1974)
The plastic and the ultimate resistance of four-bolt extended end-plate connections
Özkılıç, Yasin Onuralp; Topkaya, Cem (2021-06-01)
Widely used design guidelines and specifications provide methods to calculate plastic resistance of end-plates considering yield line mechanisms. Experiments reported to date showed that the ultimate resistance of end-plates can be considerably larger than its plastic resistance due to strain hardening. Using the ultimate strength in design can be a viable and cost-effective option; however, limited studies exist on quantifying the ultimate strength. In this paper, a database of four-bolt extended end-plate...
The Design of a high frequency pulse width modulation integrated circuit with external synchronization capability
Şahin, Osman Ulaş; Koçer, Fatih; Department of Electrical and Electronics Engineering (2017)
The Pulse Width Modulation (PWM) has been playing an active role in circuits and systems for many years. The PWM is an irreplaceable part of the switch-mode power supplies (SMPS) and the class D power amplifiers (PA). The high frequency PWM operation is the key for having more compact SMPSs and class D PAs since it provides size reduction of the passive components, which dominates the size and the cost of these circuits. The digital implementation of the high frequency PWM inherently suffers from the lack o...
The strain hardening rotating hollow shaft subject to a positive temperature gradient
Eraslan, Ahmet Nedim; Mack, W. (Springer Science and Business Media LLC, 2007-11-01)
Based on Tresca's yield criterion and the flow rule associated with it, the distribution of stress, strain and displacement in a linearly strain hardening elastic-plastic hollow shaft subject to a positive radial temperature gradient and monotonously increasing angular speed is investigated. Presupposing circular symmetry and plane strain conditions, the problem is accessible to an analytical treatment. It is found that - depending on the temperature difference between the outer and the inner surface - qual...
Citation Formats
C. Yaylali, “The design and operation od a manually operated spot welding machine.,” Middle East Technical University, 1966.
METU IIS - Integrated Information Service open@metu.edu.tr