Use of simulation in the assessment of the reliability of structural systems

Download
047297.pdf
1995
Şatıroğlu, Alp
Show full item record
95
views
0
downloads
https://hdl.handle.net/11511/10317
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Use of simulated ground motions for the evaluation of energy response of simple structural systems
Karim Zadeh Naghshineh, Shaghayegh; Askan Gündoğan, Ayşegül; Erberik, Murat Altuğ (Elsevier BV, 2019-08-01)
The literature on energy-based seismic design and assessment methodologies of structural systems mostly relies on real ground motion datasets. However, certain bias exists due to lack of homogeneity in available ground motion datasets. In this study, a large set of ground motions is simulated. Next, the effects of various parameters on seismic behavior of SDOF systems in terms of energy are studied using nonlinear time history analyses. The stochastic finite-fault simulations are performed on the western pa...
Use of genetic algorithms in simultaneous size, shape and topology optimization of space trusses
Kahraman, Mevlüt; Erbatur, Fuat; Department of Civil Engineering (1999)
Use of theoretical waste inventories in planning and monitoring of hazardous waste management systems
Yilmaz, Ozge; Can, Zehra S.; Toröz, İsmail; DOĞAN, Ozgur; Oncel, Salim; Alp, Emre; Dilek, Filiz Bengü; Karanfil, Tanju; Yetiş, Ülkü (2014-08-01)
Hazardous waste (HW) generation information is an absolute necessity for ensuring the proper planning, implementation, and monitoring of any waste management system. Unfortunately, environmental agencies in developing countries face difficulties in gathering data directly from the creators of such wastes. It is possible, however, to construct theoretical HW inventories using the waste generation factors (WGFs). The objective of this study was to develop a complete nationwide HW inventory of Turkey that reli...
Use of detached eddy simulation for aerodynamics and aeroacoustics of blade sections
Cengiz, Kenan; Özyörük, Yusuf; Department of Aerospace Engineering (2018)
Investigation of noise generation mechanisms due to turbulence necessitates resolution of eddies in space and time. Among the broad-band noise simulation tools, direct numerical simulation (DNS) is the most comprehensive one. However, it is prohibitively expensive. At the other extreme, unsteady Reynolds-averaged Navier-Stokes (URANS) based solvers, which are widely used in industry, can merely be reliable for attached flows. Besides, the inherent time-averaging procedure destroys the unsteadiness of eddies...
Use of computationally efficient MoM in the analysis and design of printed structures
Alatan, Lale Hayırlıoğlu; Birand, Mehmet Tuncay; Aksun, İrsadi; Department of Electrical and Electronics Engineering (1997)
Citation Formats
A. Şatıroğlu, “Use of simulation in the assessment of the reliability of structural systems,” Middle East Technical University, 1995.
METU IIS - Integrated Information Service open@metu.edu.tr