Use of expanded metal as metal decking

Download
1996
Aral, Önder Levent

Suggestions

Use of steel fiber reinforced mortar for seismic strengthening
Sevil, Tugce; BARAN, MEHMET; Bilir, Turhan; Canbay, Erdem (2011-02-01)
The objective of this research was to develop an economical, structurally effective, and practically applicable steel fiber reinforced mortar (SFRM) which could be applied onto the hollow brick infills of a reinforced concrete (RC) structure. Masonry walls were almost converted into strong and rigid infills with the application of SFRM. Two different mix proportions were produced with the composition of Portland cement, fine aggregate, water, and plasticizer or bonding agent as the chemical admixture. Tests...
Use of expanded metals as shear confinement reinforcement in concrete members phase l: axially loaded columns
Yanarateş, Mehmet Seçkin; Özcebe, Güney; Department of Civil Engineering (1990)
Use of Powdered Steel Slag in Cement-Bentonite Slurry Wall Construction
Çokça, Erdal; Talefirouz, Davood (2022-05-01)
This paper presents a comprehensive laboratory investigation into the workability, permeability and unconfined compressive strength of powdered-steel-slag, lime-amended cement-bentonite backfills using several series of mixtures. Prepared mixtures comprise various proportions of cement, bentonite, powdered steel slag, and lime, which have been tested for particle size distribution (PSD), liquid limit, plastic limit, permeability, and unconfined compressive strength (UCS). For each mixture, the effect of var...
Use of Solid Bowl Decanter as Mineral Concentration Device
Bawani, Mohammed Raheel; Arol, Ali İhsan (2018-10-25)
Use of granulated blast furnace slag and lime in cement-bentonite slurry wall construction
Talefirouz, D.; Çokça, Erdal; Omer, J. (2016-01-01)
This paper describes an experimental investigation on the use of ground granulated blast furnace slag (GGBFS) and lime as stabilizers for cement-bentonite (CB) slurry used in constructing vertical barrier walls. The primary objective is to develop a blended material, which can reduce the permeability and also enhance the strength of CB slurry walls with a shortened curing time. Mixtures comprising various proportions of cement, bentonite, GGBFS, and lime were prepared and tested for particle size distributi...
Citation Formats
Ö. L. Aral, “Use of expanded metal as metal decking,” Middle East Technical University, 1996.