A software for predicting quasi stationary characteristics of SR motors

Download
029600.pdf
1993
Niakan, Fariborz
Show full item record
133
views
0
downloads
https://hdl.handle.net/11511/10550
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

A Software for analysis of permanent magnet AC motors
Bulgan, Deniz; Ertan, Hulusi Bülent; Department of Electrical and Electronics Engineering (2014)
Nowadays permanent magnet motors became very popular in almost every area of industry such as automotive, aerospace and automation due to having higher efficiency, better torque-speed characteristics, longer life, higher dynamic response, higher torque per volume when compared to brushed DC and induction motors. These advantages made PM motors very essential and the need of design and analysis of PM motors became more important with the need of specialized applications. In this thesis, a previously develope...
A Model for Predicting Theoretical Process Energy Consumption of Rotational Parts Using STEP AP224 Features
Uluer, Muhtar Ural; Akkuş, Kadir; KILIÇ, SADIK ENGİN (2013-04-17)
Energy efficiency in manufacturing has become a key concern due to the increased awareness of the adverse effects of global warming. First step for increasing energy efficiency is to quantify the energy consumed for manufacturing processes. This study presents a prediction model for the theoretical energy that is consumed during the manufacturing processes of a rotational part and resulting CO2 release. Theoretical energy is the tool tip energy required to remove the given volume of chip. Prediction model i...
A software for analysis and design optimization of switched reluctance motor
Yalçıner, Levent Burak; Ertan, Hulusi Bülent; Department of Electrical and Electronics Engineering (2004)
In this study, development of software, which can analyze and optimize an SRM by accurately calculating its performance, is aimed. Existing methods in the literature are investigated. Some studies for the calculation of performance use 2D field solutions and are known to be accurate; however, using field solutions is not feasible for the optimization purpose. So, a method based on a set of normalized permeance and force data are chosen for prediction of magnetizing characteristics. Selected methods are prog...
A Parameter Error Identification Method for Power Plant Dynamic Models
Açılan, Etki; Göl, Murat; Department of Electrical and Electronics Engineering (2022-6-30)
Incorrect parameters in a power plant dynamic model affect the analysis results and control decisions in a power system, which may have serious consequences. The online calibration techniques in the literature utilize sensitivity analysis to determine the identifiable parameters before the calibration, and treat majority of sensitive parameters as potentially erroneous. Hence, the candidate parameter subset for calibration mostly consists of distractors, i.e. highly sensitive but already correct parameters....
A SHORT-TERM LOAD PREDICTION ALGORITHM FOR DYNAMIC ECONOMIC-DISPATCH
Erkmen, İsmet; ADANIR, T (1994-04-14)
Citation Formats
F. Niakan, “A software for predicting quasi stationary characteristics of SR motors,” Middle East Technical University, 1993.
METU IIS - Integrated Information Service open@metu.edu.tr