Load forecast methods for distribution planning and results of applications in Western Zone of İstanbul.

Egeli, Mustafa Tayyar


Load transfer capacity of doweled joints in concrete roads under static loading.
Tarım, Güzin; Department of Civil Engineering (1971)
Load analysis of an aircraft using simplified aerodynamic and structural models
Ünay, Emre; Kayran, Altan; Department of Aerospace Engineering (2015)
Aircraft must be light enough to fly but also strong enough to endure the loads they experience during flight. Designing such a structure is one of the most demanding works in an aircraft design project. In order to design such a structure, accurate evaluation of loads is important. Once the loads applied to the structure are calculated precisely, then the deflections and stresses can be calculated and sizing of the structures can be performed accordingly. Therefore, in aircraft design projects, loads group...
Load rating of concrete-deck-on-steel-stringer bridges using field-calibrated 2D-grid models
Türer, Ahmet (Elsevier BV, 2011-04-01)
This paper presents and discusses issues related to structural identification, calibrated model-based load rating, and sensitivity of rating to the analytical model, along with experimental studies conducted on an existing concrete-deck-on-steel-stringer bridge. The proposed model-updating procedure uses collected dynamic data (mode shapes, modal frequencies, and order of modes) as well as static deformed shape information. Two-dimensional (2D) grid models were developed to successfully simulate the transve...
Load Torque Estimation for Spindle Drives Using Structured Neural Network Topologies
Dölen, Melik; Lorenz, Robert (null; 2001-11-07)
Stress Scaling Factors for Seismic Soil Liquefaction Engineering Problems: A Performance-Based Approach
Çetin, Kemal Önder; Bilge, Habib Tolga (2013-06-19)
Most of the widely used seismic soil liquefaction triggering methods propose cyclic resistance ratio (CRR) values valid at the reference normal effective stress (sigma(v,0)') of one atmosphere and zero static shear stress (tau(st,0)) states. Then, a series of correction factors are applied on this reference CRR, for the purpose of assessing the variability due to normal effective and static shear stress states (i.e. K-sigma and K-alpha corrections) acting on the horizontal plane. In the literature, a number...
Citation Formats
M. T. Egeli, “Load forecast methods for distribution planning and results of applications in Western Zone of İstanbul.,” Middle East Technical University, 1993.