Analysis of the effect of friction in sheet metal drawing

Download
068546.pdf
1997
Yücesoy, Can Ali
Show full item record
79
views
0
downloads
https://hdl.handle.net/11511/10584
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Analysis of the influence of bubble size and texture on foam characterization
Evren Ozbayoglu, M.; Akın, Serhat; Eren, Tuna (null; 2005-12-01)
Foam is one of the most frequently-used lightened fluids in underbalanced drilling applications. However, the rheological characterization of foam remains a difficult and challenging task largely due to problems associated with problems associated with the accurate determination of rheological parameters. Foam flow tests were conducted using an experimental flow loop which consisted of a set of smooth pipes of various diameters. Foams generated from different surfactants and different generation techniques ...
Analysis of the effects of vertical pre-release cracks on prestressed concrete bridge girders
Baran, Eray; French, Catherine; Wyffels, Tina (Precast/Prestressed Concrete Institute, 2004-11-01)
Vertical cracks, termed "pre-release cracks," beginning at the top flange and propagating downward into the section depth have been observed to develop during the production of long-span prestressed concrete bridge girders. The cracking which is attributed to the restrained shrinkage the concrete and thermal effects during the curing period prior to release of the prestressing strands, tends to be more critical for long-span girders with deep sections and large amounts of prestressing strands. Studies were ...
Analysis of the constant pressure filtration and electrofiltration behavior of kaolin slurries
Şan, Osman; Hoşten, Çetin; Department of Mining Engineering (1991)
Investigation of the effects of equal channel angular extrusion on light weight alloys
Karpuz, Pınar; Gür, Cemil Hakan; Karaman, İbrahim; Department of Metallurgical and Materials Engineering (2012)
Severe plastic deformation methods are of great interest in industrial forming applications, as they give rise to significant refinement in microstructures and improvements in mechanical and physical properties. In the “Equal Channel Angular Extrusion (ECAE)”, which is the most common method for production of ultrafine grained bulk samples, very high plastic strains are introduced into the bulk material without any change in cross section. This study is composed of two main parts. Part I focuses on the plas...
Analysis of axisymmetric cup drawing in relation to friction
Darendeliler, Haluk (1996-03-15)
The application of computer-aided simulation to manufacturing by using sheet-metal forming processes in industry, leads to the elimination of the repetitive production of expensive dies, and the loss of time, labor and material. The finite-element method has been widely used in the anlaysis of sheet-metal forming processes, in this way making it possible to determine the deformed shape and the variation in the thickness of the material. Hence, the drawability and the shape of the blank can be determined in ...
Citation Formats
C. A. Yücesoy, “Analysis of the effect of friction in sheet metal drawing,” Middle East Technical University, 1997.
METU IIS - Integrated Information Service open@metu.edu.tr