Analysis of the influences of marble characteristics on the marble production cost parameters

Download
068749.pdf
1997
Akbilgiç, Metin N
Show full item record
74
views
0
downloads
https://hdl.handle.net/11511/10628
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Analysis of the Heat Capacity for Pure CH4 and CH4/CCl4 on Graphite Near the Melting Point and Calculation of the T-X Phase Diagram for(CH3)CCl3+CCl4
Yurtseven, Hasan Hamit (2016-06-15)
We study the temperature dependence of the heat capacity C-p for the pure CH4 and the coadsorbed CH4/CCl4 on graphite near the melting point. The heat capacity peaks are analyzed using the experimental data from the literature by means of the power-law formula. The critical exponents for the heat capacity are deduced below and above the melting point for CH4 (T-m = 104.8 K) and CH4/CCl4 (T-m = 99.2 K). Our exponent values are larger as compared with the predicted values of some theoretical models exhibiting...
Analysis of the Junction Properties of C/GaSe<sub>0.5</sub>S<sub>0.5</sub>/C Back-to-Back Schottky-Type Photodetectors
Khanfar, Hazem K.; Qasrawi, Atef F.; Hasanlı, Nızamı (Institute of Electrical and Electronics Engineers (IEEE), 2015-4)
In this paper, a C/GaSe0.5S0.5/C metal-semiconductor-metal photodetector is suggested and described. The device is explored by means of current-voltage and capacitance-voltage (C-V) characteristics under different photoexcitation intensities. It was observed that the design of the back-to-back Schottky device has reduced the dark current of the normal Ag/GaSe0.5S0.5/C Schottky diode by 13 times and increased the photosensitivity from 3.8 to similar to 2.1x10(3). The device exhibited a barrier height of 0.84...
Analysis of heat treatment effect on springback in v-bending
Sarıkaya, Onur Turgay; Darendeliler, Haluk; Department of Mechanical Engineering (2008)
Aluminum based alloys have wide area of usage in automotive and defense industry and bending processes are frequently applied during production. One of the most important design criteria of bending processes is springback, which can be basically defined as elastic recovery of the part during unloading. To overcome this problem, heat treatment is generally applied to the workpiece material to refine tensile properties. In this study, the effect of heat treatment on springback characteristics of aluminum stud...
Analysis of shopping activity and its spatial organization
İnce, Dilek; Günay, Baykan; Department of City and Regional Planning (2000)
Analysis of mine accidents and financial consequences to gli mines
Özkan, Gökay; Güyagüler, Tevfik; Department of Mining Engineering (2007)
The expenditures resulting from work accidents is increasing every year. Among the other work accidents, mine accidents result important loss of time, money and lives. From the point of view of mine accidents, studies about cost of mine accidents need some contributions. In this thesis, cost of mine accidents to worker, employer, and total economy of country will be analysed in the light of data from Ministry of Labour, Social Security and Social Insurance Institution, and Türkiye Coal Enterprises. General ...
Citation Formats
M. N. Akbilgiç, “Analysis of the influences of marble characteristics on the marble production cost parameters,” Middle East Technical University, 1997.
METU IIS - Integrated Information Service open@metu.edu.tr