Use of chromium ore in high-chromium steelmaking

Download
035589.pdf
1994
Erdinç, Adem Atanur
Show full item record
106
views
0
downloads
https://hdl.handle.net/11511/10652
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Use of chromium ore in chromium-steel production.
Tunç, M. Ziya; Department of Metallurgical Engineering (1982)
Use of Guleman chromium ore in electric arc furnace steelmaking.
Öztürk, Mustafa; Department of Metallurgical Engineering (1985)
Usage of boron compounds in copper production
Rüşen, Aydın; Geveci, Ahmet; Topkaya, Yavuz Ali; Department of Metallurgical and Materials Engineering (2013)
Copper losses to slag are generally between 0.7-2.3% during the copper matte smelting stage. In this study, the aim was to reduce these losses in the slag phase. For this purpose, usage of some additives (especially calcined colemanite labeled as CC, boric oxide-B2O3 and calcium oxide-CaO as well) as flux material was investigated. The flash furnace matte-slag (FFM-FFS) obtained from Eti Copper Inc. and a master matte-slag (MM-MS) produced synthetically were used as starting materials. Additives were tested...
Use of waste marble powder in brick industry
Bilgin, N.; YEPREM, Hasibe Aygül; ARSLAN, SÖNMEZ; Bilgin, A.; Günay, Emre; Marsoglu, M. (2012-04-01)
The usability of waste marble dust as an additive material in industrial brick were investigated. Marble wastes were collected from marble deposits which are located at Southwest of Turkey and industrial brick mortar was obtained from a brick company in Istanbul. Waste marble dust and brick mortar were prepared for various processes of industrial brick investigation. Waste material in different proportions was mixed with industrial brick mortar starting amount of 0 wt.% up to 80 wt.%. in 41 x 8 x 8 mm recta...
USE OF COLEMANITE IN FERRONICKEL SMELTING
KESKİNKILIÇ, ENDER; Pournaderi, S.; Geveci, Ahmet; Topkaya, Yavuz Ali (2019-01-01)
Use of colemanite in metal-slag systems aims primarily to decrease the viscosity of slag and, therefore, achieve better metal-slag separation. Enhanced metal-slag separation is helpful to decrease the number of suspended metal/alloy droplets in slag, i.e. the physical losses. In the literature, successful use of colemanite was reported both in steelmaking and copper matte smelting processes. Ferronickel smelting slags contain nickel in the range of 0.1-0.2% and correspondingly, metal-slag distribution ratio...
Citation Formats
A. A. Erdinç, “Use of chromium ore in high-chromium steelmaking,” Middle East Technical University, 1994.
METU IIS - Integrated Information Service open@metu.edu.tr