A study to improve image quality of special aluminium alloy radiographs

Download
1994
Yaşar, Koray

Suggestions

A model study to investigate the lubrication conditions of an internal combustion engine main bearings.
Çelikbudak, Halit; Department of Mechanical Engineering (1979)
A study on hydroxyl terminated polyether based composite propellants
Eşiyok, Hacı; Yılmazer, Ülkü; Department of Chemical Engineering (2016)
The present study was aimed at investigating the effects of isocyanate, chain extender and curing catalyst types on the mechanical, structural and thermal properties of Hydroxyl Terminated Polyether (HTPE) based gumstock samples and the effects of oxidizer, energetic plasticizer, and ballistic modifier types on the ballistic and thermal properties of propellant samples. HTPE based polyurethane networks were synthesized by hand mixing and applying vacuum for degassing of resulting mixtures. After curing, the...
A study of thin film solid phase microextraction methods for analysis of fluorinated benzoic acids in seawater
Boyacı, Ezel; Viteri, C. Ricardo; Pawliszyn, Janusz (2016-03-04)
Fluorinated benzoic acids (FBAs) are frequently used as tracers by the oil industry to characterize petroleum reservoirs. The demand for fast, reliable, robust, and sensitive approaches to separate and quantify FBAs in produced water, both in laboratory and field conditions, has not been yet fully satisfied. In this study, for the first time, thin film solid phase microextraction (TF-SPME) is proposed as a versatile sample preparation tool for the determination of FBAs in produced water by pursing two diffe...
A study on microstructural characterization of the interface between apatite-wollastonite based glass ceramic and feldspathic dental porcelain
PEKKAN, Gürel; PEKKAN, KERİMAN; PARK, JONGEE; Öztürk, Abdullah (2016-12-01)
In this study, the contact area between the glass ceramic containing apatite [Ca-10(PO4)6(O,F-2)] and wollastonite [CaO center dot SiO2] crystals (A-W glass ceramic) and feldspathic dental porcelain was characterized using scanning electron microscope and energy dispersive spectroscopy. Alumina-added A W glass ceramics were prepared by sintering glass compacts in the MgO-CaO-SiO2-P2O5-Al2O3 system at 1100 degrees C. Commercially available dental porcelains for alumina frameworks were applied on the A-W glas...
A study on the catalytic effect of manganese dioxide and sodium perborate on baking properties of oil bonded cores.
Müştekin, Muammer; Department of Metallurgical Engineering (1973)
Citation Formats
K. Yaşar, “A study to improve image quality of special aluminium alloy radiographs,” Middle East Technical University, 1994.