The effect of austempering on microstructure and impact toughness of DIN 34CrNiMo5 gun barrel steel

Download

035459.pdf

Date

1994

Author

Kurtuluş, B. Murat

Metadata

Show full item record

Item Usage Stats

75
views

0
downloads

URI

https://hdl.handle.net/11511/10664

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

The effect of double austenitization on the microstructure and toughness of AISI M2 high speed steel Ögel, Bilgehan (1998-06-01) In this study, the effect of double austenitization on microstructure and toughness of AISI M2 high speed steel was investigated. For double austenitization treatment, the specimens, which are hardened initially at 1220 degrees C and quenched in air, were hardened for a second time in the temperature range 1150 - 1050 degrees C. For comparison purposes, another set of specimens is austenitized singly in the temperature range 1150 - 1050 degrees C. Tempering process was carried out between 500 - 640 degrees ...
The effect of double austenitization on microstructure and fracture toughness of AISI M2 high speed steel Ögel, Bilgehan; Tekin, Erdoğan; Department of Metallurgical Engineering (1990)
The effect of austempering parameters on impact and fracture toughness of din 35nicrmov12.5 gun barrel steel Aksu, Engin; Atala, Haluk; Department of Metallurgical and Materials Engineering (2005) In this study the effects of different austempering times and temperatures on impact toughness, hardness and fracture toughness properties of 35NiCrMoV12.5 gun barrel steel are investigated. 300 °C, 325 °C and 350 °C were chosen as austempering temperatures. Isothermal holding times at these temperatures were chosen as 1 minute, 10 minutes, 1 hour and 10 hours. It was found that, 350 °C being an exception, austempering temperature and impact toughness has an inverse relationship and impact toughness increas...
The effect of retained austenite on the abrasive wear resistance of aisi 52100 steels Büget, Cem; Atala, Haluk; Department of Metallurgical Engineering (1993)
The effect of Cu and austempering treatment parameters on the impact toughness and hardness of ductile cast iron Yaşar, Hakan; Tekin, Erdoğan; Department of Metallurgical Engineering (1994)

Citation Formats

B. M. Kurtuluş, “The effect of austempering on microstructure and impact toughness of DIN 34CrNiMo5 gun barrel steel,” Middle East Technical University, 1994.