The effect of stress ratio on fatigue crack growth kinetics of AISI 4340 steel

Download

038600.pdf

Date

1995

Author

Çadırcı, Ş. Melih

Metadata

Show full item record

Item Usage Stats

83
views

0
downloads

URI

https://hdl.handle.net/11511/10666

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

The effect of strain rate and temperature on forming limit diagram for DKP-6112 and AZ31 materials Goksen, Seckin; Darendeliler, Haluk (2020-01-01) Forming limit diagrams (FLDs) are used in sheet metal operations widely for predicting blank fracture and forming characteristics of materials. There are three approaches for building forming limit diagrams which are the experimental, theoretical and numerical methods. Experimental method, which includes Nakazima formability test, is generally preferred for determining forming limit diagrams, although it requires complex experimental setup and effort. This study, firstly, compares the experimentally determi...
The Effect of Strain Rate and Temperature on Forming Limit Diagram for DKP-6112 and AZ31 Materials Goksen, Seckin; Darendeliler, Haluk (2020-01-01)
The effect of double austenitization on microstructure and fracture toughness of AISI M2 high speed steel Ögel, Bilgehan; Tekin, Erdoğan; Department of Metallurgical Engineering (1990)
The effect of austempering parameters on impact and fracture toughness of din 35nicrmov12.5 gun barrel steel Aksu, Engin; Atala, Haluk; Department of Metallurgical and Materials Engineering (2005) In this study the effects of different austempering times and temperatures on impact toughness, hardness and fracture toughness properties of 35NiCrMoV12.5 gun barrel steel are investigated. 300 °C, 325 °C and 350 °C were chosen as austempering temperatures. Isothermal holding times at these temperatures were chosen as 1 minute, 10 minutes, 1 hour and 10 hours. It was found that, 350 °C being an exception, austempering temperature and impact toughness has an inverse relationship and impact toughness increas...
THE EFFECT OF HORIZONTAL IRREGULARITIES AND BASE ISOLATION CONFIGURATION ON SEISMIC RESPONSE OF RC BUILDINGS Yazıcıoğlu, Eylem Bilge; Caner, Alp; Dicleli, Murat; Department of Earthquake Studies (2022-2-22) This study aims to evaluate the effect of horizontal irregularities and base isolation configuration on the seismic response of reinforced concrete base-isolated buildings. A set of structural models with varying re-entrant corner geometric properties has been utilized to make evaluations with respect to square-symmetric ordinary form. In addition to this set, alternative models with non-uniform mass distributions in the plan have also been employed to expand the building set. Elastic response spectrum-base...

Citation Formats

Ş. M. Çadırcı, “The effect of stress ratio on fatigue crack growth kinetics of AISI 4340 steel,” Middle East Technical University, 1995.