Production and microstructure characterisation of silicon carbide reinforced aliminium-copper alloy matrix composites by squeeze casting method

Download
047279.pdf
1995
Onat, Adem
Show full item record
80
views
0
downloads
https://hdl.handle.net/11511/10673
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Production and characterization of alumina fiber reinforced squeeze cast aluminum alloy matrix composites
Keleş, Özgür; Kalkanlı, Ali; Department of Metallurgical and Materials Engineering (2008)
The aim of the present study was to investigate the effects of different levels of Saffil alumina fiber addition, magnesium content in aluminum alloy matrix and casting temperature on the mechanical behavior, microstructure and physical properties of short fiber reinforced aluminum matrix composites. The main alloying element silicon was kept constant at 10 wt%. Magnesium contents were selected as 0.3 wt% and 1 wt%. Saffil alumina fiber preforms varied from 10 to 30 vol%. The casting temperatures were fixed...
Production and heat treatment of alloyed high strength ductile iron
Türker, Funda Şeniz; Kalkanlı, Ali; Department of Metallurgical and Materials Engineering (1998)
Production and heat treatment of 6111 aluminum alloy sheet for car body panel application
Sevimli, Aylin; Kalkanlı, Ali; Department of Metallurgical and Materials Engineering (2015)
Aluminum is one of the major candidates to supply sufficient weight reduction without missing mechanical properties and performance. Therefore, studies have been focused on improving properties of aluminum in automotive application since 1920s. Heat treatable aluminum alloy are used in car body panels of automotive application such as 2xxx, 7xxx and 6xxx series aluminum alloys base on the mechanical properties. On the other hand, based on physical and economical properties 6xxx series aluminum alloys are wi...
Production and characterization of alumminum-rare earth based bulk amorphous/nanocrystalline composite
Kutsal, Mustafacan; Kalay, Yunus Eren; Department of Metallurgical and Materials Engineering (2016)
The structure, production and consolidation of binary Al-RE (RE=Sm, Tb) and multicomponent Al-RE-TM (TM= Fe, Ni, Cu) metallic glasses were studied mainly in two parts. In the first part, solid-state amorphous structures of melt-spun and magnetron sputtered thin films of Al90Tb10 were investigated with high energy X-ray diffraction (HEXRD) constrained reverse Monte Carlo (RMC) simulations. The experimental findings and calculated models had shown that amorphous alloys having the same composition comprises th...
Production and properties of glass bonded apatite-wollastonite bioceramics
Vakıfahmetoğlu, Çekdar; Timuçin, Muharrem; Department of Metallurgical and Materials Engineering (2005)
Apatite containing bioceramic materials are considered to be potentially useful for replacement or repair of natural bone. In the present study, the aim was to produce a new composite bioceramic containing crystalline apatite and wollastonite phases with a bimodal grain size distribution. The manufacturing scheme was based on the liquid phase sintering process in which the compacts pressed from powders of apatite (HAP or Si-HAP) and pseudowollastonite was sintered in the presence of a liquid phase. Three di...
Citation Formats
A. Onat, “Production and microstructure characterisation of silicon carbide reinforced aliminium-copper alloy matrix composites by squeeze casting method,” Middle East Technical University, 1995.
METU IIS - Integrated Information Service open@metu.edu.tr