Direct casting of iron-aliminum intermetallics

Download
047200.pdf
1995
Özbayramoğlu, Y Murat
Show full item record
43
views
0
downloads
https://hdl.handle.net/11511/10675
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Direct reduction of Divriği Pellet with soma coal in a rotary kiln
Yıldırım, Mehmet Cemal; Sevinç, Naci; Department of Metallurgical Engineering (1989)
Direct photopatterning of light-activated gold nanoparticles
Subramani, Chandramouleeswaran; Yu, Xi; Agasti, Sarit. S.; Duncan, Bradley; Eymur, Serkan; Tonga, Murat; Rotello, Vincent M. (Royal Society of Chemistry (RSC), 2011-01-01)
Photoactivatable gold NPs were patterned via photolithography. In this approach, charge reversal of the ligands on NPs upon UV irradiation induces crosslinking to generate stable NP patterns.
Direct hydrothermal synthesis of palladium-incorporated silicate-structured mesoporous catalysts
Sener, Canan; Doğu, Timur; Dogu, Guelsen (2007-01-01)
Pd-Si-structured novel mesoporous nanocomposite catalytic materials, having quite high Pd/Si ratios, were synthesized by an acidic direct hydrothermal synthesis route. The nanocomposite catalytic materials were then characterized by XRD, XPS, EDS, nitrogen adsorption, and SEM techniques. Unlike MCM-41, the XRD patterns indicated a rather wide d((100)) band at a 2 theta value of about 1.9. The materials, with very high Pd/Si wt ratios between 1.43 and 2.66, were synthesized and had BJH surface area values be...
Direct synthesis of hydrogen storage alloys from their oxides
Tan, Serdar; Öztürk, Tayfur; Aydınol, Mehmet Kadri; Department of Metallurgical and Materials Engineering (2011)
The aim of this study is the synthesis of hydrogen storage compounds by electrodeoxidation technique which offers an inexpensive and rapid route to synthesize compounds from oxide mixtures. Within the scope of this study, two hydrogen storage compounds, FeTi and Mg2Ni, are aimed to be produced by this technique. In the first part, effect of sintering conditions on synthesis of FeTi was studied. For this purpose, oxide pellets made out of Fe2O3-TiO2 powders were sintered at temperatures between 900 °C – 1300...
Direct arylation polymerization of benzodithiophene with a series of electron acceptors for organic photovoltaic devices
Toppare, Levent Kamil; Leclerc, Mario; Bura, Thomas (null; 2018-04-06)
Citation Formats
Y. M. Özbayramoğlu, “Direct casting of iron-aliminum intermetallics,” Middle East Technical University, 1995.
METU IIS - Integrated Information Service open@metu.edu.tr