The production of glass particle reinforced aluminium composites by Vortex method

Download
056900.pdf
1996
Kayılı, Muharrem
Show full item record
132
views
0
downloads
https://hdl.handle.net/11511/10679
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

The Production of light emitting pin diodes based on the plasma deposited amorphous silicon carbide films.
Sel, Kıvanç; Atılgan, İsmail; Department of Physics (2002)
The Processing of porous Ni-Rich TiNi alloys via powder metallurgy and their characterization
Nakaş, Gül İpek; Bor, Şakir; Department of Metallurgical and Materials Engineering (2012)
In the scope of this study, TiNi foams with porosities in the range of 39-64 vol% were processed from prealloyed powders by Mg space holder technique. Porous TiNi alloys displayed homogeneously distributed spherical pores with interconnections, which is suitable for bone ingrowth. Porous Ti-50.8 at%Ni alloys were processed by sintering at 1200 °C for 2 h to analyze the microstructure as well as mechanical behavior. SEM, TEM and XRD studies were conducted for the characterization of microstructure and phase ...
The Production of a ceramic magnet strontium hexaferrite
Çifçi, Ertuğrul; Kalkanlı, Ali; Department of Metallurgical and Materials Engineering (1998)
The synthesis of zinc, chloride and fluoride doped nano hydroxylapatites by precipitation method and investigation of their mechanical, structural and biological properties
Uysal, İdil; Evis, Zafer; Severcan, Feride; Department of Biomedical Engineering (2011)
This study aimed synthesizing hydroxylapatite (HA) and Zn2+, F- and Cl- doped HA by solution precipitation method. The synthesized compounds were sintered at 1100°C for 1h. For structural characterization, density of the samples were measured by Archimedes’ method. It was observed that Zn2+ addition increased the density significantly whereas F- caused a decrease and Cl- increased the density with a little amount. XRD was applied to the samples and it was found that co-doping of Zn2+ and F- ions decreased t...
The processing of mg-ti powder for hydrogen storage
Çakmak, Gülhan; Öztürk, Tayfur; Department of Metallurgical and Materials Engineering (2011)
A study was carried out on the selection of processing condition that would yield Mg-Ti with most favourable hydrogenation properties. Processing routes under consideration were; mechanical milling under inert atmosphere, reactive milling i.e. milling under hydrogen atmosphere, ECAP (equal channel angular pressing) and thermal plasma synthesis. Structure resulting from each of these processing routes was characterized with respect to size reduction, coherently diffracting volume and the distribution of Ti c...
Citation Formats
M. Kayılı, “The production of glass particle reinforced aluminium composites by Vortex method,” Middle East Technical University, 1996.
METU IIS - Integrated Information Service open@metu.edu.tr