Investigation of crack formation in the injection pump camshafts made of carburized SAE 8620 steel

Download
068453.pdf
1997
Keskin, Atila
Show full item record
65
views
0
downloads
https://hdl.handle.net/11511/10697
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Investigation of mechanical property changes after MIG welding of (7XXX) series aluminum alloys
Okay, Sena; Ögel, Bilgehan; Batıgün, Caner; Department of Metallurgical and Materials Engineering (2016)
There is an increasing demand for aluminum alloys not only in aerospace industry but also in automotive industry due to its low density. Welding is the most effective and commonly used joining technique in those industries, therefore, aluminum welding plays an important role. 7039 aluminum alloy, is a high strength alloy and it is suitable for armor applications. Like other aluminum alloys, after MIG welding, remarkable decrease in strength is observed and therefore applications are restricted. The aim of t...
Investigation of key-hole weldability of line pipe steel grade x70m in terms of fracture toughness
Çağırıcı, Mehmet; Gür, Cemil Hakan; Yurtışık, Koray; Department of Metallurgical and Materials Engineering (2017)
Micro-alloyed and thermomechanically rolled HSLA line pipe steels promise optimum strength and toughness. Their microstructure contains generally globular and acicular ferrite. However, the heat induced by welding during line pipe fabrication alters the microstructure at the proximity of the fusion zone which affects indirectly microstructure of the heat affected zone, consequently the fracture toughness, is governed by the chemistry of the material and the thermal cycles during the welding process. In fabr...
Investigation of the failure mechanism and stabilization of a landslide in weathered tuffite, Giresun, northeastern Turkey
Avsar, Ozgur; Akgün, Haluk; Kockar, Mustafa Kerem (2014-11-01)
This study investigates the causes and failure mechanism of the Aksu landslide that occurred during the construction of the Giresun-Espiye road between KM: 1 + 030-1 + 170 in northern Turkey and recommends proper stabilization techniques. For the purpose of investigating the causes and mechanism of this slope failure, engineering geological mapping, geotechnical investigation and rock mass characterization were performed. From top to bottom, weathered tuffite, tuffite, flysch, and dacitic tuffite were the m...
Investigation of Crystallographic Defects in CN3MN Grade CastSuperaustenitic Steels
Baskan, Mertcan; Chumbley, Scott; Kalay, Yunus Eren (null; 2015-03-15)
Investigation of fatigue in steel H-piles of integral bridges subjected to intense seismic ground motions
Dicleli, Murat (2016-06-30)
Citation Formats
A. Keskin, “Investigation of crack formation in the injection pump camshafts made of carburized SAE 8620 steel,” Middle East Technical University, 1997.
METU IIS - Integrated Information Service open@metu.edu.tr