Production and characterization of lead zirconate titanate and lead magnesium niobate-lead titanate piezoceramics

Download
068564.pdf
1997
Taşpınar, Ercan
Show full item record
57
views
0
downloads
https://hdl.handle.net/11511/10699
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Production and characterization of lead magnesium niobate-lead titanate ceramics
Çamurlu, Hasan Erdem; Timuçin, Muharrem; Department of Metallurgical and Materials Engineering (2001)
Production and properties of glass bonded apatite-wollastonite bioceramics
Vakıfahmetoğlu, Çekdar; Timuçin, Muharrem; Department of Metallurgical and Materials Engineering (2005)
Apatite containing bioceramic materials are considered to be potentially useful for replacement or repair of natural bone. In the present study, the aim was to produce a new composite bioceramic containing crystalline apatite and wollastonite phases with a bimodal grain size distribution. The manufacturing scheme was based on the liquid phase sintering process in which the compacts pressed from powders of apatite (HAP or Si-HAP) and pseudowollastonite was sintered in the presence of a liquid phase. Three di...
Production and identification of rare-earth doped lithium triborate
Yılmaz, Ayşen; Ozdemir, Zeynep; Yılmaz, Aysun (2006-07-20)
Research in the field of non-linear optical (NLO) devices lead to an increasing interest in new borate compounds, capable of expanding the frequency range provided by common laser sources. Lithium triborate (LBO) is a newly developed ideal non-linear optical crystal used in laser weapon, welder, radar, tracker, surgery, communication, etc. In this study, synthesis and identification of rare-earth doped lithium triborate was carried out. Borates containing rare-earth elements are of great interest since they...
Production and characterization of activated carbon from hazelnut shell and hazelnut husk
Çuhadar, Çiğdem; Yücel, Hayrettin; Department of Chemical Engineering (2005)
In this study, the pore structures and surface areas of activated carbons produced from hazelnut shell and hazelnut husk by chemical activation technique using phosphoric acid (H3PO4), at relatively low temperatures (300, 400 and 500oC), were investigated. Raw materials were impregnated with different H3PO4 solutions of 30%, 40%, 50% and 60% by weight. To produce activated carbon, acid impregnated samples were heated; at a heating rate of 20 oC/min to the final carbonization temperature and held at that tem...
Production and characterization of boron carbide powder by mechanochemical method
Büyüklüoğlu, Berkay; Sargın, Irmak; Department of Metallurgical and Materials Engineering (2023-1-27)
In this study, the production of boron carbide (B4C) powders at room temperature by mechanochemical alloying is investigated. The conventional production methods of this industrially important material requires high energy consumption, whereas the low energy production methods could only produce small amounts. By optimizing the mechanochemical alloying, the know-how for the larger scale production is developed. The mechanochemical method consists of mechanical grinding and acid leaching to remove by-p...
Citation Formats
E. Taşpınar, “Production and characterization of lead zirconate titanate and lead magnesium niobate-lead titanate piezoceramics,” Middle East Technical University, 1997.
METU IIS - Integrated Information Service open@metu.edu.tr