Modification of barium titanate for positive temperature coefficient of resistivity applications

Download
068542.pdf
1997
Yılmaz, Hüseyin
Show full item record
87
views
60
downloads
https://hdl.handle.net/11511/10703
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Modification of polypropylene films for antistatic and anti-scratch properties
Kürkçü, Pınar; Bayramlı, Erdal; Department of Polymer Science and Technology (2007)
Polypropylene films are widely used in industry, especially for packaging purposes. However, these films become statically charged when they are subject to friction. The accumulation of charges in some applications can be harmful, especially for the electronic devices and can cause undesirable appearance due to the attraction of dusts. Furthermore, minimum susceptibility to mechanically induced surface damage is a desired property since scratches reduce the mechanical strength and the bright texture of the ...
Modification of Acrylic Bone Cements with Oxygen Plasma and Additives
Endoğan Tanır, Tuğba; Kızıltay, Aysel; Hasırcı, Vasıf Nejat; Hasırcı, Nesrin (2012-09-01)
Acrylic bone cements which are commonly used for the fixation of orthopedic prostheses, were prepared at different formulations, by using either ground poly(methyl methacrylate) (PMMA) particles or homogeneously synthesized PMMA microspheres with application of plasma and addition of various ingredients in order to improve mechanical and thermal properties. PMMA powders having three different particle size (ground and sieved particles with 0-50 mu m (BC1 group, average particle size: 21 mu m) and 50-150 mu ...
Modification of calcium carbonate surfaces in natural gas plasma for their use in polypropylene composite systems
Öztürk, Serhat; Akovalı, Güneri; Department of Polymer Science and Technology (2006)
In this study calcium carbonate (CaCO3) particles are surface modified by using plasma polymerized natural gas and effects of surface modification of CaCO3 filler on mechanical properties of CaCO3-PP composites are investigated. Different combination of plasma factors; RF power, natural gas flow rate, and plasma discharge durations, are investigated. Mechanical properties such as tensile strength and Young’s Modulus are measured by tensile testing machine. Storage modulus and loss modulus measurements are d...
Modification of zeolites for biosensor applications
Ozansoy Kasap, Berna; Akata Kurç, Burcu; Turan, Raşit; Department of Micro and Nanotechnology (2018)
In the field of biosensor, zeolites are promising materials due to their large surface areas, mechanical and chemical stabilities, ion exchange capacities and controllable hydrophilicity/hydrophobicity. The powder form of zeolites was the only obstacle of their utilization for biosensor fabrication. In this study, drop-coating and polyethylenimine (PEI) coating methods were developed for improving and optimizing the zeolite usage in immobilization of enzymes. These methods were applied for fabrication of co...
MODIFICATION OF ALUMINUM SILICON CAST ALLOYS BY RARE-EARTH ADDITION
SELCUK, E (1988-06-01)
Citation Formats
H. Yılmaz, “Modification of barium titanate for positive temperature coefficient of resistivity applications,” Middle East Technical University, 1997.
METU IIS - Integrated Information Service open@metu.edu.tr