Dry-forward combustion in A 3-D physical model with the application of diverse well configurations

Download

029257.pdf

Date

1993

Author

Shamsul, Aziz

Metadata

Show full item record

Item Usage Stats

49
views

0
downloads

URI

https://hdl.handle.net/11511/10712

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Dry reforming of methane over CeO2 supported Ni, Co and Ni-Co catalysts Ay, Hale; Üner, Deniz (2015-12-01) Ceria supported Ni, Co monometallic and Ni-Co bimetallic catalysts were prepared by incipient wetness impregnation method, calcined at two different temperatures (700 degrees C and 900 degrees C) and tested for dry reforming of methane reaction at 700 degrees C. The activities of ceria-based Ni containing catalysts decreased with increasing calcination temperature accompanied by a decrease in coke deposition. While Ni/CeO2 and Ni-Co/CeO2 catalysts exhibited comparable high activities, Co/CeO2 catalysts exhi...
Dry grinding kinetics of binary mixtures of ceramic raw materials by Bond milling Ipek, H; Ucbas, Y; Yekeler, M; Hoşten, Çetin (Elsevier BV, 2005-01-01) The kinetics of batch dry grinding of binary mixtures of ceramic raw materials, namely quartz-kaolin, quartz-potassium feldspar and kaolin-potassium feldspar, from the feed sizes of -3.350 + 2.360, -2.000 + 1.400, -0.850 + 0.600, -0.500 + 0.355 and -0.300 + 0.212 mm have been determined using a Bond mill with a mixture of ball sizes of 38.10, 31.75, 25.40, 19.05 and 12.70 mm diameter and total mass of 22.648 kg. The Bond mill used was a size of 30.5 cm diameter, 30.5 cm length, with a total volume of 22,272...
Dry sliding wear behaviour of Al-Fe-Si-V alloys at elevated temperatures Koraman, Emrah; Baydoğan, Murat; Sayilgan, Seda; Kalkanlı, Ali (2015-01-15) High temperature strength of Al-Fe-V-Si alloys due to quaternary silicide dispersoids in their microstructures has been well documented in the literature. In those works, these materials have been shown as promising candidates to compete with titanium alloys at elevated temperatures. However, there is a lack of information on elevated temperature wear behaviour of those materials, which should be one of the main considerations at elevated temperature use. In order to contribute to this field, dry sliding we...
Batch Combustion of Sewage Sludge - Coal Blends in a Laboratory Scale Drop Tube Furnace Sanin, Faika Dilek; Sever Akdağ, Ayşe; Onur, Atak (null; 2017-05-08)

Citation Formats

A. Shamsul, “Dry-forward combustion in A 3-D physical model with the application of diverse well configurations,” Middle East Technical University, 1993.