Design a mechanical flight control systems for light aircraft

Download
116229.pdf
2001
Akman, Yunus
Show full item record
220
views
0
downloads
https://hdl.handle.net/11511/10817
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Design of a reconnaissance and surveillance robot
Özdemir, Erman Çağan; Söylemez, Eres; Department of Mechanical Engineering (2013)
Scope of this thesis is to design a man portable robot which is capable of carrying out reconnaissance and surveillance missions. Due to design needs, the study is mainly focused on throw impact damage mitigation and hopping potential with carbon dioxide gas. Also, electromechanical design of the robot is carried out according to the design specifications.
Tümleşik Modüler Motor Sürücü Sistemi Tasarımı
Uğur, Mesut; Keysan, Ozan (null; 2017-10-25)
Bu çalışmada, bir Tümleşik Modüler Motor Sürücü (TMMS) sistemi tasarımı gerçekleştirilmiştir. TMMS sistemi için modüler bir kesirli oluklu, konsantre sargılı (FSCW), sabit mıknatıslı senkron motor (PMSM) ile birlikte Galyum Nitrat (GaN) teknolojisine dayalı modüler motor sürücü güç katı tasarımı yapılmıştır. Konvansiyonel sistemlere göre %2’lik verim artışı sağlanmıştır. Tümleşik motor sürücü sistemine uygun DA bara kondansatör seçimi gerçekleştirilmiştir. Interleaving tekniği kullanılarak kondansatör boyut...
Design of a magnetically tuned vibration absorber
Nakkaş, Halit Erdem; Özgen, Gökhan Osman; Department of Mechanical Engineering (2019)
In this thesis, a TVA is designed, manufactured and validated experimentally. The TVA uses eddy current effect as the damping mechanism with adjustable damping through changing distance between magnets and the conductors. In order to tune the damping level of the absorber to the desired range, magnetic analyzes are conducted and selection of conductor and magnets are made accordingly. Physical design of the TVA consists of a mass element, a spring element and a damping element. Compression helical spring is...
Design of a shock absorber for weapon systems
Canik, Erdem; Çalışkan, Mehmet; Department of Mechanical Engineering (2014)
Shock absorbing pistons, as the absorbers of the instantaneous shocks and the recoil forces of weapon systems embodying them, are subjected to very high forces. The pistons are required not only to decrease the recoil forces down to favorable values for the other components of the system to function properly and the operator to operate the system comfortable, but also they should not be destructively rigid considering the dynamics of the weapons. The majority of the shock absorber producers in the local mar...
Design of a touch trigger probe for a coordinate measuring machine
Karuç, Emre; Dölen, Melik; Department of Mechanical Engineering (2007)
Coordinate Measuring Machines (CMMs) have been widely used in industry in order to determine the form / dimensional tolerances of workpieces with very complicated geometrical shapes. Therefore, CMM is an important tool during the manufacturing and quality control phases. Workpiece to be measured on a CMM is probed via touch trigger probe through its stylus tip. In other words, by virtue of the touch trigger probes CMM can acquire the dimensional data of the workpiece that is to be measured. Therefore the pr...
Citation Formats
Y. Akman, “Design a mechanical flight control systems for light aircraft,” Middle East Technical University, 2001.
METU IIS - Integrated Information Service open@metu.edu.tr