Dynamic modeling and control of a stewart platform type motion simulator

2001
Özdağlar, Mehmet
Show full item record
124
views
0
downloads
https://hdl.handle.net/11511/10892
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Dynamic modelling and control of a gimballed airborne antenna platform with mass unbalance and friction
Şeref, Tuğçe; Leblebicioğlu, Mehmet Kemal; Department of Electrical and Electronics Engineering (2018)
Inertial stabilized gimballed systems are widely-used in many applications to achieve a high precision positioning. Airborne antennas pointing target as a part of the satellite communication may be examples of such systems. This thesis presents the dynamic modelling and control of a two axes gimballed airborne antenna platform. First, reference frames and the transformation matrices are defined to build up the motion of the antenna and kinematic equations of each gimbal are derived. Next, the dynamic equati...
Dynamic modeling and control of an electromechanical control actuation system
Yerlikaya, Ümit; Balkan, Raif Tuna; Department of Mechanical Engineering (2016)
Electromechanical simulators, actuators are widely used in miscellaneous applications in engineering such as aircrafts, missiles, etc. These actuators have momentary overdrive capability, long-term storability and low quiescent power/low maintenance characteristics. Thus, electromechanical actuators are applicable option for any system in aerospace industry, instead of using hydraulic actuators. In the same way, they can be used in control actuation section of missiles to deflect flight control surfaces. Mo...
DYNAMIC MODELING AND CONTROL OF AN ELECTROMECHANICAL CONTROL ACTUATION SYSTEM
Yerlikaya, Umit; Balkan, Raif Tuna (2017-10-13)
Electromechanical actuators are widely used in miscellaneous applications in engineering such as aircrafts, missiles, etc. due to their momentary overdrive capability, long-term storability, and low quiescent power/low maintenance characteristics. This work focuses on electromechanical control actuation systems (CAS) that are composed of a brushless direct current motor, ball screw, and lever mechanism. In this type of CAS, nonlinearity and asymmetry occur due to the lever mechanism itself, saturation limit...
Dynamic analysis and modelling of a rocket launcher system
Çiçek, Burak Can; Darendeliler, Haluk; İder, Kemal; Department of Mechanical Engineering (2014)
In this study, a compliant version of the cardan universal joint whose compliant parts are made of blue polished spring steel is considered. The original design consist of two identical parts assembled at right angles with respect to each other. Identical parts can be produced from planar materials; thus, it has the advantage of easiness in manufacturing. As a design example, two mechanisms are dimensioned with different plate thicknesses. The resultant stresses at flexural hinges of these samples are deter...
Dynamic modelling and simulation of a wind turbine
Altuğ, Ayşe Hazal; Yavrucuk, İlkay; Department of Aerospace Engineering (2015)
In this thesis, a dynamic model for a horizontal axis wind turbine is developed for an upwind configuration using the MATLAB/Simulink environment. Blade Element Momentum Theory is used to model the rotor. It is assumed that the rotor blades are rigid and wind speed is uniform. Aerodynamic and gravitational forces are calculated as distributed loads. Verification of the model is done by using the LMS Samtech, Samcef for Wind Turbines software. Aerodynamic properties of the blades, sectional loads and moments...
Citation Formats
M. Özdağlar, “Dynamic modeling and control of a stewart platform type motion simulator,” Middle East Technical University, 2001.
METU IIS - Integrated Information Service open@metu.edu.tr