Modelling of ground water contamination (an oil field application)

Öz, Bora


Modelling of Glass Forming Ability of Fe-B based Alloy Systems
Gürbüz, Selen; Mehrabov, Amdulla; Akdeniz, Mahmut Vedat (null; 2005-09-28)
Modelling of nitrogen removal in Ankara wastewater treatment plant
Kim, Eun-Ah; Gökçay, Celal F.; Department of Environmental Engineering (2002)
Nowadays environmental legislations in many countries have all imposed strict effluent quality standards for carbon, nitrogen and phosphorous for wastewater treatment plants. This in turn caused complicated design, operation and control of biological treatment systems. As a result, computer programs based on complex mathematical models are now developed for the simulation of such complicated systems. The influent wastewater characterization based on COD and Nitrogen fractionation became very important in de...
Modelling of binder burnout process for ceramic compacts
Brıscoe, B.j.; Savvas, T.; Özkan, Necati (1997-12-01)
Modelling of building structures for lateral load analysis
Boz, Cumhur Tufan; Çıtıpıtıoğlu, Ergin; Department of Civil Engineering (1987)
Modelling and transient analysis of a hybrid liquid desiccant cooling system
Karshenass, Arash; Yamalı, Cemal; Baker, Derek Keıth; Department of Mechanical Engineering (2014)
Desiccant Cooling Systems (DCS) are considered as an alternative method for conventional vapor compression cooling systems (VCCS) or at least a complimentary component to them. In conventional VCCS inlet air is cooled down to blow its dew point for dehumidification and then is reheated again to obtain air flow with desired temperature and humidity, and consequently inefficient consumption of energy. In DCS, dehumidification of air is done by utilizing of desiccant material to get desirable humidity and then...
Citation Formats
B. Öz, “Modelling of ground water contamination (an oil field application),” Middle East Technical University, 1997.