Design of a reconfigurable five-axes robot ARM

Download
035663.pdf
1994
Yücel, Ahmet Serdar
Show full item record
60
views
0
downloads
https://hdl.handle.net/11511/10951
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Design of a configurable all terrain mobile robot platform
Bayar, Gökhan; Koku, Ahmet Buğra; Konukseven, Erhan İlhan (2009-10-01)
With the increased funding from various agencies, research conducted in the field of mobile robotics has significantly increased during the last couple of decades. Due to wide range of applications mobile robots of different sizes and capabilities are required in the field. Despite the wide spectrum of applications to be developed for mobile robots, available platforms on the market for research purposes are very few in number, and limited in their capability for multi-purpose use. Evidently purchasing new ...
Design of a Re-configurable dual frequency microstrip antenna with integrated RF MEMS switches
Onat, Sinon; Ünlü, Mehmet; Alatan, Lale; Demir, Şimşek; Akın, Tayfun (2005-07-08)
The complete design of a re-configurable dual frequency antenna structure, including its integrated RF MEMS switches and their actuation lines together with a CPW feed, is introduced. The number of switches used in the inset is decreased compared to the hybrid design we presented previously (Onat, S. et al., IEEE Int. Antennas and Propag. Symp., vol.2, p.1812-15, 2004). Instead of utilizing available RF MEMS switches, new switches suitable for this application are designed. Two different switch configuratio...
Design of a radiation hardened PWM controller built on SOI
Kılıç, Emrecan; Külah, Haluk; Department of Electrical and Electronics Engineering (2018)
Design of efficient and compact switch-mode power supplies (SMPS) is a popular topic in power electronics. Silicon has been used as semiconductor material of switches in DCDC converters for decades. However, preference of using GaN as semiconductor material of switches in these topologies has recently increased due to their superior properties. GaN FETs have lower gate capacitance, lower channel resistance, higher frequency operation, higher breakdown voltage and higher temperature operation than silicon MO...
Design of a modular orthopedic implant
Erkan, Onur Mert; Tönük, Ergin; Department of Mechanical Engineering (2015)
Bone fracture due to trauma and bone defects by birth are very common in orthopedics, making their treatment crucial. In this study, a novel design to treat upper arm fractures is introduced and assessed mechanically. The design offers medical doctors longitudinal and angular flexibility when compared to widely used orthopedic plates. Hence the new design covers a variety of fracture types. Earlier conceptual designs are reviewed to demonstrate the progress of design. Mechanical performance of the final des...
Design of triple-band reconfigurable microstrip antenna employing RF-MEMS switches
Onat, S; Alatan, Lale; Demir, S (2004-06-26)
A triple-band inset-fed reconfigurable microstrip antenna is designed. The switching between the three different frequency bands is achieved through the use of RF-MEMS switches placed along the inset and along the slot placed on the radiating patch.
Citation Formats
A. S. Yücel, “Design of a reconfigurable five-axes robot ARM,” Middle East Technical University, 1994.
METU IIS - Integrated Information Service open@metu.edu.tr