Use of Guleman chromium ore in electric arc furnace steelmaking.

1985
Öztürk, Mustafa

Suggestions

Use of chromium ore in chromium-steel production.
Tunç, M. Ziya; Department of Metallurgical Engineering (1982)
USE OF COLEMANITE IN FERRONICKEL SMELTING
KESKİNKILIÇ, ENDER; Pournaderi, S.; Geveci, Ahmet; Topkaya, Yavuz Ali (2019-01-01)
Use of colemanite in metal-slag systems aims primarily to decrease the viscosity of slag and, therefore, achieve better metal-slag separation. Enhanced metal-slag separation is helpful to decrease the number of suspended metal/alloy droplets in slag, i.e. the physical losses. In the literature, successful use of colemanite was reported both in steelmaking and copper matte smelting processes. Ferronickel smelting slags contain nickel in the range of 0.1-0.2% and correspondingly, metal-slag distribution ratio...
Use of chromium ore in high-chromium steelmaking
Erdinç, Adem Atanur; Sevinç, Naci; Department of Metallurgical Engineering (1994)
Use of colemanite in ironmaking and steelmaking.
Aydoğdu, Abdi; Department of Metallurgical Engineering (1987)
USE OF GANGUE KAOLINS FROM COAL DEPOSITS IN SYNTHETIC ZEOLITE PRODUCTION
Kutlu, Burak Temel; Toksoy Köksal, Fatma; Akata Kurç, Burcu; Department of Geological Engineering (2022-8-29)
Kaolin is a mineral with industrial value and can be used as a raw material in different areas. In most uses, pure quality kaolin is required. However, not all the kaolin occurrences are pure as much as needed and additional processes are applied before use. Nevertheless, some occurrences are accepted as gangue material due to their poor quality and low reserve. Kaolin-rich layers are widespread in coal deposits, but their quality is low. The presence of clay-rich layers with kaolin content in coal deposits...
Citation Formats
M. Öztürk, “Use of Guleman chromium ore in electric arc furnace steelmaking.,” Middle East Technical University, 1985.