Investigation of production and service parameters of proximal femoral prosthesis

Download
002896.pdf
1988
Aygün, Hacer
Show full item record
132
views
0
downloads
https://hdl.handle.net/11511/11099
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Investigation of parameters affecting the drying rate of sanitary wares
Güngör, Ergin; Güngör, Ergin; Department of Metallurgical and Materials Engineering (2005)
The influence of drying parameters namely residence time before drying, drying temperature, drying time, relative humidity, and slip recipe on the drying rate of slip cast sanitary wares, predominantly lavatories and toilet closets, was studied. The drying temperatures were changed from 80 oC to 110 oC with an increment of 10 oC. The drying time was changed from 10 to 7 h with a decrease of 1 hour. Relative humidity of the environment was changed from 60 to 75 %. The percent weight loss, percent residual mo...
Investigation of postinoculation parameters of spheroidal graphite iron production.
Ataman, Mehmet Murat; Department of Metallurgical Engineering (1992)
Investigation of structural and optical parameters of Cu-Ag-In-Se thin films deposited by thermal evaporation method
Gullu, H. H.; CANDAN, İDRİS; COŞKUN, EMRE; Parlak, Mehmet (2015-01-01)
Annealing effect on the structural and optical properties of the quaternary Cu-Ag-In-Se thin film deposited by the thermal evaporation has been investigated. The evaporation source was prepared by using vertical Bridgman-Stockbarger crystal growth system. Structural analysis indicated that annealing the films following to the deposition resulted in the changes from amorphous to polycrystalline phase with the preferred orientation along (1 1 2) direction. In order to determine the optical properties of the t...
Investigation of Optical and Electrochemical Properties of Benzene Based Solution Processable 2,1,3-Benzooxadiazole Comprising Polymers
GÖKER, SEZA; Hizalan, Gonul; Hacioglu, Serife O.; Toppare, Levent Kamil (2020-01-01)
Four novel solution processable benzooxadiazole containing alternating copolymers namely poly (5,6-bis(octyloxy)-4-(5-phenylthiophen-2-yl)-7-(thiophen-2-yl)benzo[c][1,2,5]oxadiazole)PBOTPh, poly (5,6-bis(octyloxy)-4-(5-phenylselenophen-2-yl)-7-(selenophen-2-yl)benzo[c][1,2,5]oxadiazole)PBOSPh, poly (4-(furan-2-yl)-5,6-bis(octyloxy)-7-(5-phenylfuran-2-yl)benzo[c][1,2,5]oxadiazole)PBOFPh and poly (5,6-bis(octyloxy)-4-(5-phenylthieno[3,2-b]thiophen-2-yl)-7-(thieno[3,2-b]thiophen-2-yl)benzo[c][1,2,5]oxadiazole)...
Investigation of the effects of uncertainties of inflow hydrograph and dam breach geometry on outflow hydrograph
Gödek, Neslihan Pınar; Yanmaz, Ali Melih; Çalamak, Melih; Department of Civil Engineering (2021-11)
Precise breach outflow hydrograph is crucial for the accurate determination of the flood damage and cost at the downstream region. Precise flood inundation modeling is based on the use of a realistic breach outflow hydrograph as an input. Therefore, comprehensive modeling is essential for an accurate description of breach hydrograph. This study evaluates the effects of dam breach parameters and inflow hydrograph on the peak breach outflow utilizing a probabilistic dam breach model. An experimental model was...
Citation Formats
H. Aygün, “Investigation of production and service parameters of proximal femoral prosthesis,” Middle East Technical University, 1988.
METU IIS - Integrated Information Service open@metu.edu.tr