Sintering studies on alumina

Download

003574.pdf

Date

1988

Author

Kartal, Birsen

Metadata

Show full item record

Item Usage Stats

49
views

0
downloads

URI

https://hdl.handle.net/11511/11107

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Sintering studies on Cu-Al-Ni powder mixtures. Bağdu, Ceren; Ögel, Bilgehan; Department of Metallurgical and Materials Engineering (2002)
Sinter hardening studies of ASTALOY 85 Mo powder with varying copper contents / Dinçer, Mehmet; Ögel, Bilgehan; Durlu, Nuri; Department of Metallurgical and Materials Engineering (2014) In this thesis study, the effect of sinter hardening on mechanical properties of Astaloy 85 Mo (Fe - 0.85% Mo) powder with addition of 0.8% C and varying copper contents (1% Cu, 2% Cu) was examined. Powder mixes were compacted under 600 MPa. After compaction, the samples were sintered at 1120oC under endogas from methane in an industrial sintering furnace and were sinter-hardened with three different cooling rates (0.5oC/sec., 1.5oC/sec., 3oC/sec.). The study revealed that the cooling rate does not make cri...
Sintering and electrical properties of the calcium and cobalt doped yttrium chromite ceramics Başçeri, Cem; Timuçin, Muharrem; Department of Metallurgical Engineering (1994)
Briquetting of ulexite fines Ozbayoglu, G; Ozdemir, Z (2004-08-25) Turkey is the main boron minerals producing country in the world. The most important boron minerals are tincal, colemanite and ulexite. All mining, beneficiation and handling operations generate fines which cause ecological and economical problems. Utilization of this accumulated material requires both upgrading and agglomeration. The aim of this research was to exploit the ulexite fines by improving their grade and size. Attrition-scrubbing followed by washing and screening was employed for upgrading the f...
BRIQUETTING OF ZINC CARBONATE FINES USING STATISTICAL DESIGN TECHNIQUE HICYILMAZ, C; AKDOGAN, G; OZBAYOGLU, G; AKDEMIR, U (1994-09-08)

Citation Formats

B. Kartal, “Sintering studies on alumina,” Middle East Technical University, 1988.