Effects of annealing on electrical resistivity of aluminum thin films

Download
008201.pdf
1990
Güler (Yaroğlu), Hüsniye
Show full item record
81
views
0
downloads
https://hdl.handle.net/11511/11129
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Effects of gold-induced crystallization process on the structural and electrical properties of germanium thin films
Kabacelik, Ismail; Kulakci, Mustafa; Turan, Raşit; ÜNAL, NURİ (Wiley, 2018-07-01)
Gold-induced (Au-) crystallization of amorphous germanium (-Ge) thin films was investigated by depositing Ge on aluminum-doped zinc oxide and glass substrates through electron beam evaporation at room temperature. The influence of the postannealing temperatures on the structural properties of the Ge thin films was investigated by employing Raman spectra, X-ray diffraction, and scanning electron microscopy. The Raman and X-ray diffraction results indicated that the Au-induced crystallization of the Ge films ...
Effects of resterilization on mechanical properties of polypropylene meshes
Serbetci, Kemal; Kulacoglu, Hakan; Devay, Ali Onder; Hasırcı, Nesrin (2007-09-01)
Background: The re-use of sterile packaged polypropylene meshes in hernia surgery is not recommended by the manufacturers. However, especially in developing and underdeveloped countries, many surgeons are obliged to re-use the mesh pieces after resterilization because of economic problems. The purpose of this study was to determine the effects of ethylene oxide and autoclave resterilization on the mechanical properties of polypropylene meshes.
Effects of boron doping on solid phase crystallization of in situ doped amorphous Silicon thin films prepared by electron beam evaporation
Sedani, Salar H.; Yasar, Ozlen F.; Karaman, Mehmet; Turan, Raşit (Elsevier BV, 2020-01-31)
In this work, we studied solid-phase crystallization of boron-doped non-hydrogenated amorphous Si films fabricated by electron beam evaporation equipped with effusion cells (e-Beam EC) on silicon nitride coated glass substrates. We investigated the effect of boron doping on the crystallization kinetics through a series of experiments with different boron doping concentrations controlled by the effusion cell temperature. We employed Raman spectroscopy, time-of-flight secondary ion mass spectroscopy, grazing ...
EFFECTS OF COPPER ELECTROPLATING PARAMETERS ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF Al-Cu BRAZED JOINTS
Özdemir, Ayşe; Karakaya, İshak; Department of Metallurgical and Materials Engineering (2022-12-02)
Almost 25, 50 and 75 microns of copper were deposited on aluminum alloys by using copper sulfate and copper pyrophosphate baths. And also, 20, 40 and 60 mA/cm2 current density were applied during electroplating process. After electroplating process, copper deposited aluminum pieces were brazed at 570℃ for 15 minutes by using furnace brazing in the first part of study. Shear test were applied to samples and strength of the joint which was brazed with sample that had 75 microns thickness coated at 60 mA/cm2 c...
Effects of Annealing on the Structure and Mechanical Properties of 3D Printed PLA Components
Aydın, Sencer; Yaman, Ulaş; Özerinç, Sezer (null; 2018-11-09)
We investigated the effects of annealing on the crystallinity and mechanical properties of 3D-printed PLA specimens. Specimens with a dog-bone geometry for tensile testing were prepared by fused deposition modeling using a commercial PLA filament. The specimens were annealed at different temperatures in the range 80°C – 120°C fordifferent durations (60 minutes–24 hours) in dry nitrogen environment. X-ray diffraction (XRD) and differential scanning calorimetry (DSC) characterized the crystallinity and the st...
Citation Formats
H. Güler (Yaroğlu), “Effects of annealing on electrical resistivity of aluminum thin films,” Middle East Technical University, 1990.
METU IIS - Integrated Information Service open@metu.edu.tr