Effect of surface activation of carbon fibers on the adhesive and the mechnical properties of carbon fiber composites

Download
047242.pdf
1995
Erinç, Naci Kutay
Show full item record
81
views
0
downloads
https://hdl.handle.net/11511/11142
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Effect of coating materials and mixture constituents on the permeability of concrete
Tekin, Ahmet Veli; Erdoğan, Sinan Turhan; Department of Civil Engineering (2012)
The improvement in the impermeability of concrete was studied using different methods. The main aim was to investigate impermeability improvement of concrete and to compare these methods. Two different methods were examined to investigate and compare impermeability and strength improvement of concrete by using two different sets of concrete specimens. These methods included the application of coating materials to concrete and the production of concrete using different constituent amounts and types. The firs...
Effect of Polymers on the Rheological Properties of KCl Polymer Type Drilling Fluid
Kök, Mustafa Verşan (2005-05-01)
In the course of this research, the effect of two polymers (xanthan gum and polyanionic cellulose) on the rheological properties of KCl/polymer type drilling fluids was investigated. Non-Newtonian drilling fluids are conventionally characterized by rheological models (Bingham Plastic, Power Law, Casson, Herchel-Bulkley and Robertson-Stiff). In this research, forty-five KCl/polymer data sets of varying compositions are prepared. Polymer addition to the system has affected the model and caused a variation of ...
Effect of surface modification of rice straw on mechanical and flow properties of TPU-based green composites
Tayfun, Umit; DOĞAN, Mehmet; Bayramlı, Erdal (2016-05-01)
In this study, rice straw (RS) which was one of the major agricultural residues was used as filler in bio-based thermoplastic polyurethane (TPU). Several treatments including hot water, alkali, permanganate, peroxide and silane were applied for modifying the surface of RS. The effects of surface modifications on mechanical, flow, morphological, and water absorption properties of green composites were investigated at a constant 30 wt% RS loading. Silane treatment performed after alkaline treatment gave the h...
Effect of isothermal transformation treatment and tempering on the microstructure and hardness of a medium c and high si steels
KAFADAR, Gülten; Kalkanlı, Ali; ÖZDEMİR, ABBAS TAMER; Ögel, Bilgehan (2021-01-01)
This research work aims to study the effect of 2wt%Mo on bainitic transformation kinetics and bainite morphology in 0.6wt%C-1.2wt%Si-1.0wt%Mn-0.2wt%Cr steel. Specimens are austenitized at 950°C and rapidly cooled in salt bath and isothermally treated between 200°C-300°C for different time intervals. Another set of specimens are rapidly cooled in oil after an austenitization treatment and then tempered in the temperature range of 200°C-550°C. In C-Mn-Si specimens, the amount of retained austenite increases w...
Effect of increased volume of fibers on the fracture properties of cementitious composites
Altürk, Ufuk Emre; Yaman, İsmail Özgür; Department of Civil Engineering (2019)
To apply fiber as a reinforcement, which is much older than the history of concrete, together with concrete is rather a new technology, while cement based products are the most consumed materials after water, considering the consumption amounts. The application areas of fiber reinforced concrete are growing day by day. However, in common practice, fiber content is usually limited up to 2% due to economical, workability and agglomeration problems. This study investigates the changes in the performance of nin...
Citation Formats
N. K. Erinç, “Effect of surface activation of carbon fibers on the adhesive and the mechnical properties of carbon fiber composites,” Middle East Technical University, 1995.
METU IIS - Integrated Information Service open@metu.edu.tr