Flame retardant alkyd paint production by means of poly (dibromo phenylene oxide) polymer and bis(pyridine) bis (tribromophenoxo) copper (II) complex

Download
056443.pdf
1996
Kayadan, Şakir
Show full item record
65
views
0
downloads
https://hdl.handle.net/11511/11146
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Flame retardant alkyd paint production
Kocabaş, N. Banu; Gündüz, Güngör; Department of Polymer Science and Technology (1996)
FLAME RETARDATION AND MECHANICAL-PROPERTIES OF 1,3 PROPYLENE-GLYCOL BASED UNSATURATED POLYESTER
Gündüz, Güngör; OZTURK, S (Informa UK Limited, 1994-01-01)
Flame retardance properties of 1,3 propylene glycol based unsaturated polyester containing 40% styrene and 20% acrylonitrile were investigated. The polyester with 12% Br content is self-extinguishing while others with lower bromine contents burn slowly. The high decrease in mechanical strength due to the presence of bromine is highly compensated by acrylonitrile.
Flame retardancy and mechanical properties of pet-based composites containing phosphorus and boron-based additives
Kilinc, Mert; ÇAKAL, GAYE ÖZGÜR; Bayram, Göknur; Eroglu, Inci; Özkar, Saim (2015-06-10)
Flame retardancy of poly(ethylene terephthalate), PET, was improved using different flame retardant additives such as triphenylphosphate, triphenylphosphine oxide, zinc borate, and boron phosphate (BP). Composites were prepared using a twin screw extruder and subsequently injection molded for characterization purposes. The flame retardancy of the composites was determined by the limiting oxygen index (LOI) test. Smoke emission during fire was also evaluated in terms of percent light transmittance. Thermal s...
Flame retardancy of polyamide compounds and micro/nano composites
Gündüz, Hüseyin Özgür; Kaynak, Cevdet; Department of Polymer Science and Technology (2009)
In the first part of this dissertation, glass fiber reinforced/unreinforced polyamide 6 (PA6) and polyamide 66 (PA66) were compounded with three different flame retardants, which were melamine cyanurate, red phosphorus and brominated epoxy with antimony trioxide, by using an industrial scale twin screw extruder. Then, to investigate flame retardancy of these specimens, UL-94, Limiting Oxygen Index (LOI) and Mass Loss Cone Calorimeter (MLC) tests were carried out. In addition to flammability tests, thermogra...
Flame retardancy effects of zinc borate and nanoclay in ABS, and boron compounds in PET
Özkaraca, Ayşe Çağıl; Kaynak, Cevdet; Department of Metallurgical and Materials Engineering (2011)
In this thesis there were two main purposes, the first one being to investigate effects of zinc borate (ZB) on the flammability behavior of ABS when used with and without a traditional brominated flame retardant (BFR) / antimony trioxide (AO) system. The second purpose was to investigate contribution of nanoclays (NC) to the flame retardancy performance of the same traditional BFR compound with various combinations of AO and ZB again in ABS matrix. For these purposes, materials were melt compounded by using...
Citation Formats
Ş. Kayadan, “Flame retardant alkyd paint production by means of poly (dibromo phenylene oxide) polymer and bis(pyridine) bis (tribromophenoxo) copper (II) complex,” Middle East Technical University, 1996.
METU IIS - Integrated Information Service open@metu.edu.tr