The Design of an X.25 router VLSI chip

Download
068766.pdf
1997
Erdağ, Osman Veysel
Show full item record
46
views
0
downloads
https://hdl.handle.net/11511/1139
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

The Development and hardware implementation of a high speed adaptable packet switch fabric
Akbaba, Erdem Eyüp; Schmidt, Şenan Ece; Department of Electrical and Electronics Engineering (2013)
Routers have to be fast enough to keep pace with increasing traffic data rate because of the increasing need for network bandwidth and processing. The switch fabric component of a router is a combination of hardware and software which moves the incoming packets to the outgoing ports. The access of the input ports to the switch fabric is controlled by a scheduler which affects the overall performance together with the fabric design. In this thesis we investigate two switch fabric and scheduler architectures,...
The design and realization of a low noise 3 to 6 ghz microwave amplifier by use of a cad program
Doğan, Murat; Toker, Canan; Department of Electrical and Electronics Engineering (1992)
The design and construction of a modulation transformer using new-type of core construction.
Erkurt, Cahit; Department of Electrical Engineering (1967)
The design and construction of a 50/75 baud regenerative repeater to be used in telegraph connections.
İbek, Enver; Department of Electrical Engineering (1972)
The Design of a high frequency pulse width modulation integrated circuit with external synchronization capability
Şahin, Osman Ulaş; Koçer, Fatih; Department of Electrical and Electronics Engineering (2017)
The Pulse Width Modulation (PWM) has been playing an active role in circuits and systems for many years. The PWM is an irreplaceable part of the switch-mode power supplies (SMPS) and the class D power amplifiers (PA). The high frequency PWM operation is the key for having more compact SMPSs and class D PAs since it provides size reduction of the passive components, which dominates the size and the cost of these circuits. The digital implementation of the high frequency PWM inherently suffers from the lack o...
Citation Formats
O. V. Erdağ, “The Design of an X.25 router VLSI chip,” Middle East Technical University, 1997.
METU IIS - Integrated Information Service open@metu.edu.tr