Parameter optimization of emulsion formation and solvent evaporation process by statistical design and analysis of experiments

Download
116324.pdf
2001
Telli, Mustafa Burak
Show full item record
76
views
0
downloads
https://hdl.handle.net/11511/11509
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Parameter optimization of chemically activated mortaars containing high volumes of pozzolan by statistical design and analysis of experiments
Aldemir, Başak; Saatçioğlu, Ömer; Department of Industrial Engineering (2006)
This thesis illustrates parameter optimization of early and late compressive strengths of chemically activated mortars containing high volumes of pozzolan by statistical design and analysis of experiments. Four dominant parameters in chemical activation of natural pozzolans are chosen for the research, which are natural pozzolan replacement, amount of pozzolan passing 45 æm sieve, activator dosage and activator type. Response surface methodology has been employed in statistical design and analysis of experi...
Parameter optimization of steel fiber reinforced high strength concrete by statistical design and analysis of experiments
Ayan, Elif; Saatçioğlu, Ömer; Department of Industrial Engineering (2004)
This thesis illustrates parameter optimization of compressive strength, flexural strength and impact resistance of steel fiber reinforced high strength concrete (SFRHSC) by statistical design and analysis of experiments. Among several factors affecting the compressive strength, flexural strength and impact resistance of SFRHSC, five parameters that maximize all of the responses have been chosen as the most important ones as age of testing, binder type, binder amount, curing type and steel fiber volume fract...
Parameter sensitivity analysis of a nonlinear least-squares optimization-based anelastic full waveform inversion method
Askan Gündoğan, Ayşegül; Bielak, Jacobo; Ghattas, Omar (Elsevier BV, 2010-07-01)
In a recent article, we described a seismic inversion method for determining the crustal velocity and attenuation of basins in earthquake-prone regions. We formulated the problem as a constrained nonlinear least-squares optimization problem in which the constraints are the equations that describe the forward wave propagation. Here, we conduct a parametric study to investigate the influence of parameters such as the form of the regularization function, receiver density, preconditioning, noise level of the da...
Parameter study on tracer flow test
Aydın, Hakkı; Akın, Serhat (2019-02-13)
Periodic measurement of flow rate in production wells is essential to monitor performance of geothermal wells and reservoir. Tracerdilution method has been introduced as a reliable, cheap and environment friendly technique to measure mass flow rate and enthalpy intwo phase geothermal systems. In this study, Sodium Fluorescein is used to measure liquid phase mass flow rate in a two phase productionline and in a single phase liquid injection line. The study includes the effect of flow regime and flowrate on t...
Parameter Estimation of Electric Vehicles for Improved Range Prediction
Saglam, Berkay; Bostancı, Emine; Göl, Murat (2021-01-01)
© 2021 IEEE.In order to improve performance of range estimation of electric vehicles, parameters that affect energy consumption should be determined accurately. This paper presents a parameter estimation methodology for electric vehicles based on least squares method. In this study, the power and angular velocity of wheels are measured from the vehicle directly. In addition to those, the directional velocity data is extracted from the GPS signal, in order to avoid the parameter dependency between the angula...
Citation Formats
M. B. Telli, “Parameter optimization of emulsion formation and solvent evaporation process by statistical design and analysis of experiments,” Middle East Technical University, 2001.
METU IIS - Integrated Information Service open@metu.edu.tr