Mechanical properties of high density polyethylene filled with poly(tetrafluoroethylene)

Download
116258.pdf
2001
Türk, Serkan
Show full item record
93
views
0
downloads
https://hdl.handle.net/11511/11531
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Mechanical properties of unsaturated polyester/montmorillonite composites
Inceoglu, AB; Yılmazer, Ülkü (2001-11-29)
Nanocomposites composed of unsaturated polyester matrix and organically modified clay filler were prepared. After the synthesis, XRD patterns showed that the interlayer spacing expanded from 1.25 nm to 4.5 nm. The mechanical properties of the nanocomposites were determined and it was found that adding only 3 w/w % organically modified clay improved the flexural modulus of unsaturated polyester by 35%. From DSC diagrams, it was found that T-g values of the nanocomposites also increased with the clay content....
Mechanical properties of PM Al-Sic composites produced by conventional hot-pressing method
Kaya, Gürler; Ögel, Bilgehan; Gürbüz, Rıza; Department of Metallurgical and Materials Engineering (1999)
Mechanical Properties of 3D-Printed Elastomeric Foams
Bakır, Ali Alperen; Özerinç, Sezer (2020-11-27)
Mechanical Properties of PLA Nanocomposites Filled with Various Polyhedral Oligomeric Silsesquioxane Structures
Meyva Zeybek, Yelda; Kaynak, Cevdet (null; 2018-09-20)
Mechanical properties of plasma surface-modified calcium carbonate-polypropylene composites
Akovali, G; Akman, MA (Wiley, 1997-02-01)
Calcium carbonate was surface-modified by plasma-polymerized acetylene and the effect of surface modification on the mechanical properties of calcium carbonate-polypropylene composites was investigated. Two different plasma polymerization conditions were selected and applied. Chemical structures of plasma-polymerized acetylene products were identified. Mechanical and thermal properties of the composites prepared were evaluated and the effects of surface modification on the extent of adhesion of filler to th...
Citation Formats
S. Türk, “Mechanical properties of high density polyethylene filled with poly(tetrafluoroethylene),” Middle East Technical University, 2001.
METU IIS - Integrated Information Service open@metu.edu.tr