Implementation of time division multiplication methods for energy measuring purpose.

Download
1992
Oymak, Yücel

Suggestions

Implementation of noise filtering algorithm for automated pressure transient analysis
Coşar, Doğuhan; Sınayuç, Çağlar; Department of Petroleum and Natural Gas Engineering (2022-9-2)
In order to estimate reservoir parameters such as permeability and skin factor, well tests are performed. Pressures are recorded periodically during these tests. These parameters are crucial in predicting the amount of oil or gas that can be produced. The analysis of pressure changes provide information about the reservoir characteristics and its ability to produce hydrocarbons at a certain amount of time. Three different cases of drawdown tests are analyzed. Derivative curves are plotted using data poin...
Implementation of Dirlik's damage model for the vibration fatigue analysis
Demirel, Gürzap; Kayran, Altan (2019-09-01)
Implementation of finite difference method in frequency domain for solving 1 D sound propagation problem in air containing water droplets
Arslan, Ersen; Özyörük, Yusuf; Çalışkan, Mehmet (null; 2015-10-11)
Implementation of coupled thermal and structural analysis methods for reinforced concrete structures
Albostan, Utku; Kurç, Özgür; Department of Civil Engineering (2013)
Temperature gradient causes volume change (elongation/shortening) in concrete structures. If the movement of the structure is restrained, significant stresses may occur on the structure. These stresses may be so significant that they can cause considerable cracking at structural components of large concrete structures. Thus, during the design of a concrete structure, the actual temperature gradient in the structure should be obtained in order to compute the stress distribution on the structure due to therma...
Implementation of Robot Formation Control and Navigation Using Real Time Panel Method
Merheb, Abdel Razzak; Atas, Yunus; Gazi, Veysel; Sezer Uzol, Nilay (null; 2010-10-22)
Citation Formats
Y. Oymak, “Implementation of time division multiplication methods for energy measuring purpose.,” Middle East Technical University, 1992.