Application of linear induction machine in missile flinging system.

Download
029611.pdf
1993
Derdiyok, Adnan
Show full item record
58
views
0
downloads
https://hdl.handle.net/11511/11837
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Application of Electric Resistance Heating Method on Titanium Hot Forming at Industrial Scale
Ozturk, Fahrettin; Ece, Remzi Ecmel; Polat, Naki; Koksal, Arif; Evis, Zafer; Sheikh-Ahmad, Jamal Y. (Springer Science and Business Media LLC, 2016-11-01)
In this study, hot forming of DIN WL 3.7024 commercially pure titanium with a sheet thickness of 0.6 mm was performed by electric resistance heating. The sheet materials were heated at 600, 650, and 680 A degrees C and then hot formed with an industrial press. Grain size measurement and XRD analysis were performed for each forming temperature in order to investigate microstructure and phase changes. Results indicate that no microstructural changes have occurred at the mentioned temperature range. It was con...
Application of ultrasonic burning rate measurement method on closed bombs
Mumcu, Berkan; Kurtuluş, Dilek Funda; Arkun, Uğur; Department of Aerospace Engineering (2013)
In this thesis study, detailed information about solid rocket motors and ultrasonic burning rate measurement method is given. An experimental setup is prepared for applying the ultrasonic burning rate measurement method. Before performing the burning tests, some pre-tests are performed for affirming the ultrasonic sensor and obtaining some experimental coefficients. Two different types of propellants, which do not include aluminum, are produced for the burning tests. The first type of the propellants has tw...
Application of line of balance technique for project planning and scheduling in construction industry.
Hassan, Mohammed Jawad; Department of Civil Engineering (1985)
Application of TGA-MS technique for oil shale characterization and kinetics
Kök, Mustafa Verşan; Varfolomeev, Mikhail A.; Nurgaliev, Danis K.; Kandasamy, Jayaraman (2022-03-01)
Thermal characteristics and model free kinetics of four different oil shale samples were studied using simultaneous thermogravimetry-mass spectrometer (TGA-MS) analysis performed at three different heating rates and under air atmosphere. All the reaction regions and corresponding peak temperatures, mass loss, and the residue of oil shale samples were determined. Meanwhile, the main volatile products, primary alcohols, and aromatic compounds as products of oil shale combustion, were determined on the basis o...
Application of photostress method on stress analysis of gear teeth
Böncü, Aysel; Bilir, Ömer Gündüz; Department of Mechanical Engineering (1994)
Citation Formats
A. Derdiyok, “Application of linear induction machine in missile flinging system.,” Middle East Technical University, 1993.
METU IIS - Integrated Information Service open@metu.edu.tr