Power system real-time monitoring.

1982
Sevaioglu, Osman
Show full item record
96
views
0
downloads
Electric power systems.
https://hdl.handle.net/11511/11939
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

A study on symbol synchronization and channel estimation for m-ary orthogonal transmission
Karagözlü, Eren; Tanık, Yalçın; Department of Electrical and Electronics Engineering (2011)
In this thesis, two key issues regarding M-ary orthogonal signaling systems, namely channel estimation and symbol timing recovery are investigated. Kasami codes, which are also called quasi orthogonal codes, are used for transmission of the information in place of orthogonal waveforms. In order to achieve symbol synchronization, a timing recovery scheme based on the Maximum Likelihood (ML) estimation of timing offset is proposed and the effects of proposed structure over the receiver performance are examine...
Optimal phasor measurement unit (PMU) placement for the power systems with existing SCADA measurements
Ertürk, Bulut; Göl, Murat; Department of Electrical and Electronics Engineering (2017)
It is extremely important to maintain efficiency, sustainability and reliability of the generation, transmission and distribution of the electrical energy; hence it is mandatory to monitor the system in real time. State estimation has a key role in real time monitoring of a power system. The considered power system has to be observable in order to perform state estimation. Traditionally, power system state estimators employ SCADA measurements. However, as the number of Phasor Measurement Units (PMUs) increa...
Optimal determination and allocation of secondary frequency control reserve in a market environment considering ACE criteria /
Geren, Ali; Güven, Ali Nezih; Tör, Osman Bülent; Department of Electrical and Electronics Engineering (2014)
Frequency control in Turkey is realized under four main tasks, namely; primary, secondary, tertiary frequency control and time control according to European Network of Transmission Operators for Electricity (ENTSO-E) regulations. As being a part of an interconnected electricity network, secondary frequency control mechanism, which is realized by the utilization of an Automatic Generation Control (AGC) System, plays a crucial role in the achievement of two important goals. One of them is maintaining the freq...
Speed estimation techniques for sensorless vector controlled induction motor drive
Ertek, Talip Murat; Ersak, Ersan; Department of Electrical and Electronics Engineering (2005)
This work focuses on speed estimation techniques for sensorless closed-loop speed control of an induction machine based on direct field-oriented control technique. Details of theories behind the algorithms are stated and their performances are verified by the help of simulations and experiments. The field-oriented control as the vector control technique is mainly implemented in two ways: indirect field oriented control and direct field oriented control. The field to be oriented may be rotor, stator, or airg...
Beforehand obtaining a safety operation condition by using daily load curves in transient stability and graphical software for transient stability applications
Öztop, Celal; Ertaş, Arif; Department of Electrical and Electronics Engineering (2005)
In this thesis, relationship between two most important transient stability indices, critical clearing time and generator rotor angle is examined for one machine-infinite bus system and then extended to the multimachine case and is observed to be linear. By using the linear relationship between critical clearing time and generator rotor angle and utilizing the daily load curve, a new preventive method is proposed. The aim of this method is to make all critical clearing times longer than the relay and circui...
Citation Formats
O. Sevaioglu, “Power system real-time monitoring.,” Ph.D. - Doctoral Program, Middle East Technical University, 1982.
METU IIS - Integrated Information Service open@metu.edu.tr