Effect of millimetric perforations on CO2 diffusion and thermal transmittance of multi-layered breathing walls

Date

2026-01-01

Author

Yüncü Karanfil, Başak
Tavukçuoğlu, Ayşe

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

34
views

0
downloads

Cite This

The effect of 2 mm millimetric perforations on the performance of multi-layered breathing exterior wall systems was investigated in relation to both thermal transmittance and carbon dioxide (CO2) diffusion. The study aimed to determine whether such perforations on glass fiber coated gypsum board (GFCGB) layers could enhance gas permeability without significantly compromising thermal insulation. Three wall configurations were prepared: a reference wall with unperforated GFCGB, and two alternatives with perforations of 2 mm spaced at 5 and 1 cm intervals. These were tested in a custom-built cold box setup designed to simulate indoor and outdoor conditions and allow simultaneous measurement of steady-state U values and effective CO2 diffusion coefficients (DEFF). Results showed that the introduction of perforations increased DEFF value by 14% and 54% for the 5 and 1 cm intervals, respectively, compared to the unperforated reference. The measured U values of all testes systems, obtained by the cold-box tests under the steady-state laboratory boundary conditions, are within the range of 0.32–0.36 W/m2·K. The findings suggest that improved gas diffusion may be achieved through carefully designed perforation patterns without substantial thermal penalty. This study represents the first application of the DEFF parameter to multi-layered wall systems composed of industrially available materials, marking a shift from material-scale evaluations to envelope-scale performance assessment. The perforated wall system proposed here offers a low-tech, scalable approach for breathable building envelopes, particularly relevant in settings where mechanical ventilation may be limited or absent. Overall, the study shows that air permeability, when quantified and optimized, can be treated as a functional property of building envelopes, contributing to healthier and more sustainable architectural solutions.

Subject Keywords

breathing walls, building envelope, carbon dioxide diffusion coefficient, millimetric pore, self-ventilation, U-value

URI

https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=105039477047&origin=inward
https://hdl.handle.net/11511/119587

Collections

Department of Architecture, Article