Determination of antenna far-field radiatiation-patterns from near-field data

Download
173309.pdf
1971
Birand, Tuncay
Show full item record
97
views
100
downloads
Antennas (Electronics)
https://hdl.handle.net/11511/11959
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Analysis and design of microstrip patch antennas with arbitrary slot shapes
Şener, Göker; Alatan, Lale; Kuzuoğlu, Mustafa; Department of Electrical and Electronics Engineering (2011)
A new method is proposed that provides simple and effcient design and analysis algorithm for microstrip antennas with arbitrary patch shapes. The proposed procedure uses the mutiport network model (MNM) where the antenna is considered as a cavity bounded by perfect electric conductors on the top and the bottom surfaces and perfect magnetic conductor on the side surfaces. Ports are defined along the periphery of the patch, and the impedance matrix representing the voltage induced at one port due to a current...
Design of series-fed printed slot antenna arrays excited by microstrip lines
İncebacak, Mustafa; Alatan, Lale; Department of Electrical and Electronics Engineering (2010)
Series-fed printed slot antenna arrays excited by microstrip lines are low profile, easy to manufacture, low cost structures that found use in applications that doesn’t require high power levels with having advantage of easy integration with microwave front-end circuitry. In this thesis, design and analysis of microstrip line fed slot antenna arrays are investigated. First an equivalent circuit model that ignores mutual coupling effects between slots is studied. A 6-element array is designed by using this e...
Analysis and design of slotted substrate integrated waveguide antenna on cylindrical surface
Bayraktar, Ömer; Aydın Çivi, Hatice Özlem; Department of Electrical and Electronics Engineering (2014)
This thesis presents novel traveling wave conformal shunt slot arrays on cylindrical substrate integrated waveguide (CSIW) placed on a cylindrical surface in the circumferential direction at K-band. Mutual couplings of longitudinal slots on broad wall of CSIW are formulated and active admittance formulas of the slots are derived which are used in Elliott’s design procedure to design slotted CSIW arrays. The designs are carried out at 25 GHz using non-uniform and uniform slot separations. The non uniform slo...
Design and analysis of ultra-wideband (UWB) printed monopole antennas of circular shape
Karadağ, Serkan; Aydın Çivi, Hatice Özlem; Department of Electrical and Electronics Engineering (2017)
This study proposes three microstrip line fed circular monopole antennas with ultra-wideband (UWB) characteristics, improved omnidirectional radiation pattern and WLAN (5 GHz-6 GHz) band notched characteristics for wireless and mobile communication systems. In this thesis, first, a microstrip line fed ultra-wideband ring monopole antenna with improved omnidirectional radiation pattern is designed, fabricated and measured. Two corners are tapered on the ground plane for increasing impedance bandwidth. In ord...
Optimization of the array geometry for direction finding
Özaydın, Seval; Koç, Seyit Sencer; Tanık, Yalçın; Department of Electrical and Electronics Engineering (2003)
In this thesis, optimization of the geometry of non-uniform arrays for direction finding yielding unambiguous results is studied. A measure of similarity between the array response vectors is defined. In this measure, the effects of antenna array geometry, source placements and antenna gains are included as variable parameters. Then, assuming that the antenna gains are known and constant, constraints on the similarity function are developed and described to result in unambiguous configurations and maximum r...
Citation Formats
T. Birand, “Determination of antenna far-field radiatiation-patterns from near-field data,” Ph.D. - Doctoral Program, Middle East Technical University, 1971.
METU IIS - Integrated Information Service open@metu.edu.tr