Factors affecting the estimation of reserves and ultimate pit limits

Download
009673.pdf
1990
Yalçın, Ercüment
Show full item record
133
views
0
downloads
Ore deposits.
https://hdl.handle.net/11511/11974
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Beneficiation of Himmetoglu and Beypazari oil shales by flotation and their thermal characterization as an energy source
Altun, Naci Emre; Hiçyılmaz, Cahit; Department of Mining Engineering (2006)
Processing of Bolu-Himmetoglu (Type I Kerogen) and Ankara-Beypazari (Type II Kerogen) oil shales by flotation techniques were investigated for achieving clean solid fuel substitutes. Materials characterization was done through mineralogical, XRD and FTIR analyses. Flotation responses of the samples were tested with non-ionizing and ionizing collectors of cationic and anionic types. The effects of the collector dosage and pulp pH on cleaning were determined. Other important flotation parameters, conditioning...
A study of degration of polyethylene.
Tinçer, İ. Teoman; Akay, Galip; Department of Chemistry (1980)
Investigation of the pre-concentration possibility of scandium ores
Altınsel, Yiğit; Altun, Naci Emre; Topkaya, Yavuz Ali; Department of Mining Engineering (2018)
This study was aimed at investigating the possibility of obtaining a scandium (Sc) pre-concentrate from Eskişehir-Mihalıççık scandium bearing clayey ore through mineral processing methods namely attrition scrubbing, enhanced gravity separation by using falcon concentrator, magnetic separation and flotation concentration. In this context, the study began with the characterization of the run-of-mine Eskişehir-Mihalıççık scandium ore by performing mineralogical, XRD and chemical analyses. Mineralogical analysi...
Modelling of porphyry copper mineralization of the Eastern Pontides
Soylu, Mesut; Güleç, Nilgün; Mittwede, Steven K.; Department of Geological Engineering (1999)
Ternary nanocomposites of low density, high density and linear low density polyethylenes with the compatibilizers E-MA-GMA and E-BA-MAh
Işık Coşkunses, Fatma; Yılmazer, Ülkü; Department of Chemical Engineering (2011)
The effects of polyethylene, (PE), type, compatibilizer type and organoclay type on the morphology, rheological, thermal, and mechanical properties of ternary low density polyethylene (LDPE), high density polyethylene (HDPE), and linear low density polyethylene (LLDPE), matrix nanocomposites were investigated in this study. Ethylene – Methyl acrylate – Glycidyl methacrylate terpolymer (E-MAGMA) and Ethylene – Butyl acrylate- Maleic anhydrate terpolymer (E-BA-MAH) were used as the compatibilizers. The organo...
Citation Formats
E. Yalçın, “Factors affecting the estimation of reserves and ultimate pit limits,” Ph.D. - Doctoral Program, Middle East Technical University, 1990.
METU IIS - Integrated Information Service open@metu.edu.tr