Theoretical and experimental investigation of the rdial-drawing region of square bblanks.

1980
Kılkış, Birol İ
Show full item record
84
views
0
downloads
Deep drawing (Metal-work)., Plastics, Sheet
https://hdl.handle.net/11511/12020
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Modelling and simulation of friction in deep drawing
Başpınar, Murat; Akkök, Metin; Department of Mechanical Engineering (2011)
Different contact surface parameters and operating characteristics are observed during the deep drawing process. It is not possible to find a formulation that can be used for all lubrication regimes. Therefore, several friction models have been developed in order to overcome this problem. In this study, a math program is developed which combines Wilson’s and Khonsari’s friction models in a new model in order to increase accuracy and efficiency in friction calculations. By comparing the results of both frict...
Analysis of effects of temperature variation on deep drawing process using different constitutive laws
Demirkol, Rasih Hakan; Darendeliler, Haluk; Department of Mechanical Engineering (2019)
In this study, the influences of temperature variation in deep drawing process are investigated by changing the temperatures of the whole blank, a part of the blank, the punch and die. Different yield criteria and hardening rules are considered to form the constitutive relations. The numerical results are obtained by using a commercial finite element software. Whereas Von-Mises and Hill48 yield criteria are available in the finite element code, a subroutine is developed for embedding the Yld2003 yield crite...
Analysis of wrinkling in deep drawing processes
Dal, Saniye Rabia; Darendeliler, Haluk; Department of Mechanical Engineering (2019)
Wrinkling, observed due to compressive instability, is one of the main failure modes in deep drawing processes. The prediction and prevention of wrinkles are critical for production of stamping parts which require good surface quality. In the current work, the occurrence of wrinkling in square and cylindrical cup deep drawing processes are investigated considering various constitutive models; formed by using CPB06ex2, Hill’48, BBC2008-8p, BBC2008-16p, and von Mises yield criterion with isotropic, kinematic ...
The effect of strain rate and temperature on deep drawing for different constitutive relations
Gökşen, Seçkin; Darendeliler, Haluk; Department of Mechanical Engineering (2019)
In this study, the effects of strain rate and temperature on deep drawing process are investigated by considering different yield criteria and hardening models. For this purpose, various punch velocity and temperature values are considered using 1 mmthick DKP6112 and AZ31 sheet materials. The results are compared according to thickness strain distribution and punch force obtained by a commercial finite element software. To express constitutive relations of corresponding materials for different strain rate a...
Investigating the effect of deformation and annealing texture on magnetic anisotropy in low-C steel sheets by magnetic Barkhausen noise method
Akçaoğlu, Fehmi Ümit; Gür, Cemil Hakan; Department of Metallurgical and Materials Engineering (2013)
Deformation and annealing texture in the cold rolled low carbon steels is important for sheet metal forming operations and service performance. The aim of this study is to non-destructively investigate the effect of texture on magnetic anisotropy. Various samples having different textures and residual stress states, due to different % reduction in thickness, annealing and stress relieving treatment, were prepared. Texture maps were obtained by Magnetic Barkhausen noise measurements performed with 100 steps ...
Citation Formats
B. İ. Kılkış, “Theoretical and experimental investigation of the rdial-drawing region of square bblanks.,” Ph.D. - Doctoral Program, Middle East Technical University, 1980.
METU IIS - Integrated Information Service open@metu.edu.tr