Minimum flexural reinforcement requirement of high strength concrete T-beams with flange in tension

Download
116260.pdf
2001
Öztürk, Nazan Yılmaz
Show full item record
52
views
0
downloads
https://hdl.handle.net/11511/12181
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Minimum flexural reinforcement requirement of reinforced concrete beams
Çalışkan, Mustafa; Özcebe, Güney; Department of Civil Engineering (1999)
Minimum flexural reinforcement for T-beams made of higher strength concrete
Ozcebe, G; Ersoy, U; Tankut, T (Canadian Science Publishing, 1999-10-01)
Design codes specify minimum flexural reinforcement for reinforced concrete beams. With the extensive use of higher strength concrete, the empirical expressions of the past for minimum flexural reinforcement, in which the concrete strength is not considered, had to be revised. Six reinforced concrete T-beams, having small ratios of flexural reinforcement, were tested to study the behaviour at the positive moment region and to evaluate the code requirements on minimum flexural reinforcement. A criterion was ...
Minimum Outage Probability for the Relay Channel under Individual Power Constraints
Yüksel Turgut, Ayşe Melda; YÜKSEKKAYA, BARIŞ (2012-07-01)
In this letter, minimum outage probability for a fading relay channel is considered for long-term individual power constraints (IPC1) at the source and the relay. By utilizing Lagrange multiplier theory, it is shown that solving the IPC problem is equivalent to solving a weighted sum power constrained (wSPC) problem. Opportunistic decode and forward (ODF), and simplified ODF (SODF) protocol performances are investigated and compared with a lower bound on outage probability, under both individual and sum pow...
Minimum concave cost multicommodity network design
Bazlamaçcı, Cüneyt Fehmi (Springer Science and Business Media LLC, 2007-12-01)
The minimum concave cost multicommodity network design problem (MCMNDP) arises in many application areas, such as transportation planning, energy distribution systems and especially in the design of both packet and circuit switching backbone networks. Exact concave cost optimization algorithms have been developed but they are applicable only if the network size is small. Therefore, MCMNDP is usually solved using non-exact iterative methods. In this paper, such heuristic techniques proposed within the contex...
Minimum concave cost multicommodity network design
Say, Fatih; Bazlamaçcı, Cüneyt Fehmi; Department of Electrical and Electronics Engineering (2005)
Minimum Concave Cost Multicommodity Network Design Problem arises in many application areas, such as transportation planning, distributed energy system and especially both circuit and packet switching backbone network design. Exact concave optimization algorithms have been developed, but these methods are applicable if the network size is small. Therefore, these problems are usually solved by non-exact iterative methods. In this thesis work, methods proposed for circuit switching and packet switching networ...
Citation Formats
N. Y. Öztürk, “Minimum flexural reinforcement requirement of high strength concrete T-beams with flange in tension,” Middle East Technical University, 2001.
METU IIS - Integrated Information Service open@metu.edu.tr