Code comparison of TS 648, EUROCODE 3: PART 1.1 and load and resistance factor design - AISC for steel connections.

Download

116316.pdf

Date

2001

Author

Bayram, Hakan

Metadata

Show full item record

Item Usage Stats

58
views

0
downloads

URI

https://hdl.handle.net/11511/12185

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Design Optimization of Variable Stiffness Composite Laminates Using Surrogate Models for Compliance and Buckling Load İnci, Hasan; Kayran, Altan (2017-09-22) Usage of composite materials in aerospace industry has never been so wide in our world. Starting from the development of composites, the analyses were only done for straight fiber composites. With the improved manufacturing capabilities, designers have the ability to design more complex shapes for composites, which allows more efficient structures. In the past two decades, variable stiffness (VS) composite laminates are introduced to the literature. Within these two decades, researchers working on VS concep...
Design optimization of domestic unit heaters. Barakat, Abdelwahab; Department of Mechanical Engineering (1973)
Design requirements for intermediate ring stiffeners on discretely supported cylindrical steel shells Zeybek, Özer; Topkaya, Cem; Rotter, John Michael (2016-06-01)
Design optimization of a fully integrated charge-pump with LC tank oscillator for ultra-low voltage energy harvesting Jayaweera, H. M. P. C.; Muhtaroglu, Ali (2017-01-01) Model based optimization of a novel integrated interface circuit topology is presented for low voltage DC-DC step-up conversion. A cross-coupled charge pump is implemented in standard 0.18 mu m CMOS technology using an integrated LC tank oscillator to enable a compact, low cost, self-starting solution with maximum efficiency at ultra-low input voltage levels available from embedded micro-power generators. The voltage doubling oscillator can start up with input as low as 0.10 V. Full system can step 0.2 V up...
Performance evaluation of InAs/GaSb superlattice photodetector grown on GaAs substrate using AlSb interfacial misfit array Korkmaz, Melih; Arikan, Bulent; Suyolcu, Y. Eren; ASLAN, BÜLENT; SERİNCAN, UĞUR (IOP Publishing, 2018-03-01) We report on the growth and opto-electronic characterization of type-II InAs/GaSb superlattice (SL) mid-wavelength infrared pin photodetector grown on a GaAs substrate. AlSb interfacial misfit array was employed at the GaAs buffer/GaSb epilayer interface to reduce the dislocation density of the SL structure grown on the lattice mismatched GaAs substrate. Optical and electrical performance of this sample (SL-GaAs) were then compared with the reference sample of the same structure grown on a GaSb substrate (S...

Citation Formats

H. Bayram, “Code comparison of TS 648, EUROCODE 3: PART 1.1 and load and resistance factor design - AISC for steel connections.,” Middle East Technical University, 2001.